Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
| Port Size: | 35.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Shaft End Pressure [Max: | Left Hand (CCW) |
| Cover End Pressure [Max: | V2020-1F9S9S-1CC30-LH |
| Cover End RPM [Max: | 2 |
| Manufacturer Part No.: | Flange |
| Minor Diameter [Min: | 3/16 in |
| Shaft End RPM [Max: | N/A |
Product Details
| Port Size | 35.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Shaft End Pressure [Max | Left Hand (CCW) |
| Cover End Pressure [Max | V2020-1F9S9S-1CC30-LH |
| Cover End RPM [Max | 2 |
| Manufacturer Part No. | Flange |
| Minor Diameter [Min | 3/16 in |
| Shaft End RPM [Max | N/A |
| Major Diameter [Min | 0.875 in |
| Shaft Length | Straight w/ Key |
| Shaft Dia. | V2020 |
| Port Type | 2.3125 in |
| Rotation | Double |
| Shaft End Flow @ RPM | Buna-N |
| Displacement Cover End (cu in/revolution) | 2800 |
| Minor Diameter | N/A |
| Spline Description | SAE B, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Model No. | N/A |
| Shaft Type | 2800 |
| Port Orientation - Cover End | 2800 |
| Max. RPM [Max | N/A |
| Cover End Flow @ RPM | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | N/A |
| Integral Valve Configuration | N/A |
| Shaft Seal Type | N/A |
| Pilot Type | N/A |
| Shaft Key | N/A |
| Pressure Port Size, Shaft End | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | V2020-1F9S9S-1CC30-LH |
| Mounting Flange | 2500 |
| Relief Valve Setting | 2500 |
| Displacement Shaft End (cu in/revolution) | 1.8 |
| Major Diameter [Max | 13.5 |
| Minor Diameter [Max | N/A |
| Seal Material | Outlet Inline w/Inlet |
| GPM @ 1,800 rpm, Cover End | Outlet Inline w/Inlet |
| Pump Series | 3/4 in SAE O-Ring |
| Weight | 3/4 in SAE O-Ring |
| Mounting | 1.8 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80