High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
| Port Type: | 76.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
| Cover End Flow @ RPM: | 3525VQ35A21-1AA20 |
| Model No.: | 3 |
| Cover End Pressure [Max: | Flange |
| Relief Valve Setting: | 5/16 in |
| Max. RPM [Max: | Standard Pilot |
Product Details
| Port Type | 76.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
| Cover End Flow @ RPM | 3525VQ35A21-1AA20 |
| Model No. | 3 |
| Cover End Pressure [Max | Flange |
| Relief Valve Setting | 5/16 in |
| Max. RPM [Max | Standard Pilot |
| Port Orientation - Shaft End | 1.25 in |
| Integral Valve Configuration | Straight w/ Key |
| Pilot Type | 3525VQ |
| Displacement Shaft End (cu in/revolution) | 6.9 |
| Shaft Type | Double |
| Manufacturer Part No. | Buna-N |
| Pressure Port Size, Cover End | 2400 |
| Major Diameter [Min | N/A |
| Seal Material | SAE C, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Cover End RPM [Max | N/A |
| Minor Diameter | 2500 |
| Rotation | 2400 |
| Pump Series | N/A |
| Weight | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Port Size | N/A |
| Shaft Dia. | N/A |
| Shaft End Pressure [Max | N/A |
| Pressure Port Size, Shaft End | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 3525VQ35A21-1AA20 |
| Shaft Key | 3000 |
| Controlled Flow Rate | 3000 |
| Minor Diameter [Max | 31.5 |
| Mounting | 52.5 |
| Shaft Length | w/o Integral Valves |
| Spline Description | Outlet 135° CCW from Inlet |
| Major Diameter [Max | Outlet Opposite Inlet |
| Mounting Flange | 1 in Flange |
| Port Orientation - Cover End | 1 1/4 in Flange |
| Shaft End Flow @ RPM | 4.1 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80