HGP-2A Replace Hydromax Extrusion Oil Gear Pump HGP2A
| Max. RPM [Max: | 76.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Major Diameter [Max: | 3525VQ38A14-11AA20 |
| Manufacturer Part No.: | 3 |
| Shaft Dia.: | Flange |
| Rotation: | N/A |
| Cover End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| Max. RPM [Max | 76.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Major Diameter [Max | 3525VQ38A14-11AA20 |
| Manufacturer Part No. | 3 |
| Shaft Dia. | Flange |
| Rotation | N/A |
| Cover End Pressure [Max | Standard Pilot |
| Pump Series | 1.25 in |
| Major Diameter [Min | 14 Tooth Splined |
| Spline Description | 3525VQ |
| Port Orientation - Shaft End | 1 15/16 in |
| Minor Diameter [Min | Double |
| Shaft Length | Buna-N |
| Model No. | 2400 |
| Pressure Port Size, Cover End | 1.04 in |
| Weight | SAE C, 2 Bolt |
| Mounting | Single Shaft Seal |
| Shaft Key | 12/24 |
| Port Size | 2500 |
| GPM @ 1,800 rpm, Shaft End | 2400 |
| Cover End Flow @ RPM | N/A |
| Shaft End Pressure [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pilot Type | 1.248 in |
| Shaft End Flow @ RPM | 1.247 in |
| Pressure Port Size, Shaft End | N/A |
| Minor Diameter | N/A |
| Relief Valve Setting | N/A |
| Controlled Flow Rate | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 3525VQ38A14-11AA20 |
| Mounting Flange | 3000 |
| Shaft End RPM [Max | 3000 |
| Shaft Seal Type | 21 |
| Minor Diameter [Max | 57 |
| Port Type | w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Displacement Cover End (cu in/revolution) | Outlet Opposite Inlet |
| Shaft Type | 1 in Flange |
| Seal Material | 1 1/4 in Flange |
| Cover End RPM [Max | 2.8 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80