9H2256 Priming Pump for Cat D6C Dozer Fuel System
| Minor Diameter: | 75.0 LB |
| Displacement Shaft End (cu in/revolution): | Flange Mount |
| Shaft Dia.: | Right Hand (CW) |
| Pump Series: | 3520VQ30A5-11DD20 |
| Cover End RPM [Max: | 3 |
| Pressure Port Size, Shaft End: | Flange |
| Cover End Pressure [Max: | N/A |
| Shaft End Flow @ RPM: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter | 75.0 LB |
| Displacement Shaft End (cu in/revolution) | Flange Mount |
| Shaft Dia. | Right Hand (CW) |
| Pump Series | 3520VQ30A5-11DD20 |
| Cover End RPM [Max | 3 |
| Pressure Port Size, Shaft End | Flange |
| Cover End Pressure [Max | N/A |
| Shaft End Flow @ RPM | Standard Pilot |
| Seal Material | 1.25 in |
| Shaft End RPM [Max | 14 Tooth Splined |
| Major Diameter [Max | 3520VQ |
| Minor Diameter [Min | 1 15/16 in |
| Shaft Type | Buna-N |
| Port Orientation - Cover End | 2500 |
| Shaft Key | 1.04 in |
| Controlled Flow Rate | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Weight | 12/24 |
| Shaft Length | 2500 |
| Model No. | 2500 |
| Port Type | N/A |
| Mounting | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Max. RPM [Max | 1.248 in |
| Port Orientation - Shaft End | 1.247 in |
| Minor Diameter [Max | N/A |
| Port Size | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Rotation | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 3520VQ30A5-11DD20 |
| Mounting Flange | 3000 |
| Manufacturer Part No. | 3000 |
| Major Diameter [Min | 7.5 |
| Shaft End Pressure [Max | 45 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Pilot Type | Outlet 135° CW from Inlet |
| Spline Description | Outlet 90° CW from Inlet |
| Relief Valve Setting | 3/4 in Flange |
| Integral Valve Configuration | 1 1/4 in Flange |
| Cover End Flow @ RPM | 1.1 |
| GPM @ 1,800 rpm, Shaft End | 5.96 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80