Replace Caterpillar Wheel Loader 910 Hydraulic Gear Pump 8J8813
| Minor Diameter [Max: | 45.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Pilot Type: | Left Hand (CCW) |
| Minor Diameter: | 2520VQ17A5-11BA20LH |
| Mounting: | 2.5 |
| Mounting Flange: | Flange |
| Major Diameter [Max: | N/A |
| Max. RPM [Max: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max | 45.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Pilot Type | Left Hand (CCW) |
| Minor Diameter | 2520VQ17A5-11BA20LH |
| Mounting | 2.5 |
| Mounting Flange | Flange |
| Major Diameter [Max | N/A |
| Max. RPM [Max | Standard Pilot |
| Controlled Flow Rate | 0.875 in |
| Seal Material | 13 Tooth Splined |
| Rotation | 2520VQ |
| Shaft End Pressure [Max | 1.375 in |
| Major Diameter [Min | Double |
| Weight | Buna-N |
| Manufacturer Part No. | 2500 |
| Shaft Seal Type | 0.715 in |
| Minor Diameter [Min | SAE B, 2 Bolt |
| Port Size | Single Shaft Seal |
| Cover End Flow @ RPM | 16/32 |
| GPM @ 1,800 rpm, Cover End | 2700 |
| Shaft Dia. | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Relief Valve Setting | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Model No. | 0.873 in |
| Cover End Pressure [Max | 0.872 in |
| Shaft Type | N/A |
| Pump Series | N/A |
| Spline Description | N/A |
| Shaft Length | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 3.4 |
| Shaft Key | 3000 |
| Pressure Port Size, Cover End | 3000 |
| Integral Valve Configuration | 7.5 |
| Shaft End RPM [Max | 25.5 |
| Port Orientation - Cover End | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 135° CCW from Inlet |
| Displacement Cover End (cu in/revolution) | Outlet 90° CCW from Inlet |
| Port Type | 3/4 in Flange |
| Cover End RPM [Max | 1 in Flange |
| Port Orientation - Shaft End | 1.1 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80