Original Engine Part Filters GM32359 Fuel Filter for Kohler
| Port Orientation - Cover End: | 45.0 LB |
| Weight: | Flange Mount |
| Port Orientation - Shaft End: | Right Hand (CW) |
| Cover End Pressure [Max: | 2520VQ17A5-1DC20 |
| Shaft Seal Type: | 2 1/2 |
| Minor Diameter [Max: | Flange |
| Port Type: | 3/16 in |
| Rotation: | Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End | 45.0 LB |
| Weight | Flange Mount |
| Port Orientation - Shaft End | Right Hand (CW) |
| Cover End Pressure [Max | 2520VQ17A5-1DC20 |
| Shaft Seal Type | 2 1/2 |
| Minor Diameter [Max | Flange |
| Port Type | 3/16 in |
| Rotation | Standard Pilot |
| Cover End RPM [Max | 0.875 in |
| Spline Description | Straight w/ Key |
| Model No. | 2520VQ |
| Pilot Type | 1.9375 in |
| Major Diameter [Min | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Mounting | N/A |
| Integral Valve Configuration | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
| Shaft Length | N/A |
| Displacement Shaft End (cu in/revolution) | 2700 |
| Shaft End Pressure [Max | 2500 |
| Shaft Type | N/A |
| Port Size | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pump Series | N/A |
| Cover End Flow @ RPM | N/A |
| Pressure Port Size, Shaft End | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Controlled Flow Rate | N/A |
| Major Diameter [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520VQ17A5-1DC20 |
| Shaft End Flow @ RPM | 3000 |
| Mounting Flange | 3000 |
| Max. RPM [Max | 7.5 |
| Shaft End RPM [Max | 25.5 |
| Minor Diameter [Min | w/o Integral Valves |
| Seal Material | Outlet 45° CW from Inlet |
| Pressure Port Size, Cover End | Outlet 90° CW from Inlet |
| Shaft Key | 3/4 in Flange |
| Shaft Dia. | 1 in Flange |
| Relief Valve Setting | 1.1 |
| Minor Diameter | 3.37 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80