2243255 3502537 Diesel Engine Water Pump for E3126 Excavator
| Port Type: | 33.0 LB |
| Displacement Shaft End (cu in/revolution): | Flange Mount |
| Major Diameter [Max: | Right Hand (CW) |
| Cover End RPM [Max: | 14 gal/min @ 1200 rpm |
| Max. RPM [Max: | 1.5 |
| Port Size: | Flange |
| Shaft Type: | 3/16 in |
| Port Orientation - Cover End: | 22 |
| PDF |
|
Product Details
| Port Type | 33.0 LB |
| Displacement Shaft End (cu in/revolution) | Flange Mount |
| Major Diameter [Max | Right Hand (CW) |
| Cover End RPM [Max | 14 gal/min @ 1200 rpm |
| Max. RPM [Max | 1.5 |
| Port Size | Flange |
| Shaft Type | 3/16 in |
| Port Orientation - Cover End | 22 |
| Seal Material | 14 gpm @ 1200 rpm |
| Shaft End Flow @ RPM | 0.875 in |
| Relief Valve Setting | Straight w/ Key |
| Displacement Cover End (cu in/revolution) | 21 / 1800 |
| Shaft Key | 25V |
| Minor Diameter | 2.32 in |
| Pressure Port Size, Shaft End | Single |
| GPM @ 1,800 rpm, Cover End | None |
| Shaft End Pressure [Max | 1 in Code 61 Flange |
| Shaft Length | Viton |
| Weight | 1800 |
| Cover End Flow @ RPM | 2500 psi |
| Pilot Type | 21 |
| Manufacturer Part No. | SAE B, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Mounting | Opposite Inlet Port |
| Integral Valve Configuration | 2.8 |
| Major Diameter [Min | w/o Integral Valves |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80