3P6816 eaton cheap fuel gear pump Fit Cat D6D D6D SR 3P-6816
| Shaft End Pressure [Max: | 45.0 LB |
| Cover End RPM [Max: | Flange Mount |
| Model No.: | Left Hand (CCW) |
| Shaft End Flow @ RPM: | 2520VQ12A5-1AA20-LH |
| Integral Valve Configuration: | 2 1/2 |
| Shaft End RPM [Max: | Flange |
| Mounting Flange: | 3/16 in |
| Displacement Cover End (cu in/revolution): | Standard Pilot |
| PDF |
|
Product Details
| Shaft End Pressure [Max | 45.0 LB |
| Cover End RPM [Max | Flange Mount |
| Model No. | Left Hand (CCW) |
| Shaft End Flow @ RPM | 2520VQ12A5-1AA20-LH |
| Integral Valve Configuration | 2 1/2 |
| Shaft End RPM [Max | Flange |
| Mounting Flange | 3/16 in |
| Displacement Cover End (cu in/revolution) | Standard Pilot |
| GPM @ 1,800 rpm, Cover End | 0.875 in |
| GPM @ 1,800 rpm, Shaft End | Straight w/ Key |
| Shaft Key | 2520VQ |
| Minor Diameter [Max | 1.9375 in |
| Port Size | Buna-N |
| Port Orientation - Shaft End | 2700 |
| Pump Series | N/A |
| Shaft Dia. | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Minor Diameter [Min | N/A |
| Pilot Type | 2700 |
| Manufacturer Part No. | 2700 |
| Port Orientation - Cover End | N/A |
| Weight | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting | N/A |
| Major Diameter [Max | N/A |
| Shaft Length | N/A |
| Controlled Flow Rate | N/A |
| Seal Material | N/A |
| Cover End Flow @ RPM | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max | 2520VQ12A5-1AA20-LH |
| Displacement Shaft End (cu in/revolution) | 3000 |
| Shaft Type | 3000 |
| Cover End Pressure [Max | 7.5 |
| Major Diameter [Min | 18 |
| Port Type | w/o Integral Valves |
| Rotation | Outlet 135° CCW from Inlet |
| Pressure Port Size, Shaft End | Outlet Opposite Inlet |
| Relief Valve Setting | 3/4 in Flange |
| Pressure Port Size, Cover End | 1 in Flange |
| Minor Diameter | 1.1 |
| Spline Description | 2.45 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80