384-8611 Gear Transfer Diesel CAT Fuel Pump for Engine C12 C13
| Mounting Flange: | 76.0 LB |
| Port Orientation - Shaft End: | Flange Mount |
| Shaft End Flow @ RPM: | Right Hand (CW) |
| Model No.: | 3525VQ25A21-11DD20 |
| Displacement Cover End (cu in/revolution): | 3 |
| Mounting: | Flange |
| Displacement Shaft End (cu in/revolution): | N/A |
| Weight: | Standard Pilot |
| PDF |
|
Product Details
| Mounting Flange | 76.0 LB |
| Port Orientation - Shaft End | Flange Mount |
| Shaft End Flow @ RPM | Right Hand (CW) |
| Model No. | 3525VQ25A21-11DD20 |
| Displacement Cover End (cu in/revolution) | 3 |
| Mounting | Flange |
| Displacement Shaft End (cu in/revolution) | N/A |
| Weight | Standard Pilot |
| GPM @ 1,800 rpm, Cover End | 1.25 in |
| Minor Diameter [Min | 14 Tooth Splined |
| Controlled Flow Rate | 3525VQ |
| Shaft Key | 1 15/16 in |
| Pilot Type | Buna-N |
| Cover End RPM [Max | 2500 |
| Minor Diameter [Max | 1.04 in |
| Seal Material | SAE C, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Pump Series | 12/24 |
| Port Orientation - Cover End | 2500 |
| Major Diameter [Min | 2500 |
| Integral Valve Configuration | N/A |
| Port Size | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 1.248 in |
| Shaft End Pressure [Max | 1.247 in |
| Minor Diameter | N/A |
| Spline Description | N/A |
| Shaft Dia. | N/A |
| Cover End Flow @ RPM | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max | 3525VQ25A21-11DD20 |
| Shaft Type | 3000 |
| Port Type | 3000 |
| Manufacturer Part No. | 31.5 |
| Rotation | 37.5 |
| Shaft Length | w/o Integral Valves |
| Shaft Seal Type | Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 1 in Flange |
| Max. RPM [Max | 1 1/4 in Flange |
| Cover End Pressure [Max | 4.12 |
| Major Diameter [Max | 4.98 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80