PAKER F12-080-MS-SN-T-000-000-0 Piston Pump
What Lubrication Fitting lubrication type: is PAKER F12-080-MS-SN-T-000-000-0 Piston Pump 2.5625 in base width: in mechanical engineering? PAKER Piston Pump Manufacturing Service . Upload your CAD file for 3.1250 in B an instant.
| Brand Name: | PAKER |
| Model Number: | F12-080-MS-SN-T-000-000-0 |
| Minor Diameter [Max: | 76.0 LB |
| Shaft Dia.: | Flange Mount |
| GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
| Model No.: | 3525VQ30A17-1DD20 |
| Cover End RPM [Max: | 3 |
| Shaft End Flow @ RPM: | Flange |
| Shaft Key: | 5/16 in |
| GPM @ 1,800 rpm, Cover End: | Standard Pilot |
Product Details
| Minor Diameter [Max | 76.0 LB |
| Shaft Dia. | Flange Mount |
| GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
| Model No. | 3525VQ30A17-1DD20 |
| Cover End RPM [Max | 3 |
| Shaft End Flow @ RPM | Flange |
| Shaft Key | 5/16 in |
| GPM @ 1,800 rpm, Cover End | Standard Pilot |
| Shaft Type | 1.25 in |
| Cover End Flow @ RPM | Straight w/ Key |
| Integral Valve Configuration | 3525VQ |
| Pump Series | 2.5 in |
| Mounting | Buna-N |
| Max. RPM [Max | 2500 |
| Manufacturer Part No. | N/A |
| Displacement Cover End (cu in/revolution) | SAE C, 2 Bolt |
| Port Orientation - Cover End | Single Shaft Seal |
| Pressure Port Size, Shaft End | N/A |
| Spline Description | 2500 |
| Controlled Flow Rate | 2500 |
| Cover End Pressure [Max | N/A |
| Shaft Length | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter | N/A |
| Major Diameter [Min | N/A |
| Port Size | N/A |
| Mounting Flange | N/A |
| Pressure Port Size, Cover End | N/A |
| Port Type | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Weight | 3525VQ30A17-1DD20 |
| Shaft Seal Type | 3000 |
| Rotation | 3000 |
| Major Diameter [Max | 25.5 |
| Shaft End Pressure [Max | 45 |
| Port Orientation - Shaft End | w/o Integral Valves |
| Relief Valve Setting | Outlet 135° CW from Inlet |
| Minor Diameter [Min | Outlet 90° CW from Inlet |
| Pilot Type | 1 in Flange |
| Shaft End RPM [Max | 1 1/4 in Flange |
| Seal Material | 3.37 |
| Displacement Shaft End (cu in/revolution) | 5.96 |