Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump
| Shaft End RPM [Max: | 76.0 LB |
| Shaft Type: | Flange Mount |
| Port Type: | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): | 7.4 |
| Seal Material: | 3 |
| Mounting Flange: | Flange |
| Shaft Dia.: | N/A |
| Minor Diameter [Max: | Standard Pilot |
| PDF |
|
Product Details
| Shaft End RPM [Max | 76.0 LB |
| Shaft Type | Flange Mount |
| Port Type | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Seal Material | 3 |
| Mounting Flange | Flange |
| Shaft Dia. | N/A |
| Minor Diameter [Max | Standard Pilot |
| Cover End Flow @ RPM | 1.25 in |
| Minor Diameter [Min | 14 Tooth Splined |
| Shaft Key | 3525VQ |
| Controlled Flow Rate | 1 15/16 in |
| Port Orientation - Shaft End | Double |
| Max. RPM [Max | Buna-N |
| Port Size | 2400 |
| Pressure Port Size, Cover End | 1.04 in |
| Pump Series | SAE C, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Shaft Seal Type | 12/24 |
| Model No. | 2500 |
| Shaft End Flow @ RPM | 2400 |
| Cover End RPM [Max | N/A |
| Mounting | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | 1.248 in |
| Port Orientation - Cover End | 1.247 in |
| Spline Description | N/A |
| Pilot Type | N/A |
| Shaft Length | N/A |
| Relief Valve Setting | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 3525VQ38A14-11AA20 |
| Weight | 3000 |
| Major Diameter [Min | 3000 |
| Displacement Cover End (cu in/revolution) | 21 |
| Rotation | 57 |
| Integral Valve Configuration | w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End | Outlet 135° CCW from Inlet |
| Cover End Pressure [Max | Outlet Opposite Inlet |
| Major Diameter [Max | 1 in Flange |
| GPM @ 1,800 rpm, Cover End | 1 1/4 in Flange |
| Manufacturer Part No. | 2.8 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer