Excavator Diesel Engine 6SD1 EX300-2/3 Water Pump 1-13610944-0 replace isuzu
| Shaft Key: | 45.0 LB |
| Cover End RPM [Max: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| Pressure Port Size, Shaft End: | 2520V12A8-1DC22R |
| Shaft Length: | 2 1/2 |
| Relief Valve Setting: | Flange |
| Displacement Cover End (cu in/revolution): | 1/4 in |
| GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
Product Details
| Shaft Key | 45.0 LB |
| Cover End RPM [Max | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| Pressure Port Size, Shaft End | 2520V12A8-1DC22R |
| Shaft Length | 2 1/2 |
| Relief Valve Setting | Flange |
| Displacement Cover End (cu in/revolution) | 1/4 in |
| GPM @ 1,800 rpm, Shaft End | Standard Pilot |
| Minor Diameter [Min | 0.875 in |
| Shaft End Pressure [Max | Straight w/ Key |
| Pump Series | 2520V |
| Shaft End Flow @ RPM | 2.32 in |
| Pressure Port Size, Cover End | Buna-N |
| Port Type | 1800 |
| Shaft Seal Type | N/A |
| GPM @ 1,800 rpm, Cover End | SAE B, 2 Bolt |
| Model No. | Single Shaft Seal |
| Major Diameter [Max | N/A |
| Minor Diameter | 1800 |
| Port Size | 1800 |
| Mounting | N/A |
| Pilot Type | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Major Diameter [Min | N/A |
| Rotation | N/A |
| Weight | N/A |
| Port Orientation - Cover End | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft End RPM [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max | 2520V12A8-1DC22R |
| Cover End Flow @ RPM | 3000 |
| Seal Material | 2500 |
| Cover End Pressure [Max | 12 |
| Minor Diameter [Max | 18 |
| Spline Description | N/A |
| Shaft Type | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Shaft Dia. | 3/4 in Code 61 |
| Integral Valve Configuration | 1 in Code 61 |
| Controlled Flow Rate | 1.7 |
| Mounting Flange | 2.5 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer