Yuken DSG-03 Spool Type Hydraulic Solenoid Operated Directional Valves
| Controlled Flow Rate: | 101.0 LB |
| Shaft Length: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Shaft Seal Type: | 4525VQ60A17-11BB20 |
| Shaft End RPM [Max: | 3 1/2 |
| Minor Diameter: | Flange |
| GPM @ 1,800 rpm, Shaft End: | N/A |
| Mounting: | Standard Pilot |
| PDF |
|
Product Details
| Controlled Flow Rate | 101.0 LB |
| Shaft Length | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Shaft Seal Type | 4525VQ60A17-11BB20 |
| Shaft End RPM [Max | 3 1/2 |
| Minor Diameter | Flange |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Mounting | Standard Pilot |
| Displacement Shaft End (cu in/revolution) | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Manufacturer Part No. | 4525VQ |
| Shaft End Pressure [Max | 1.9375 in |
| Minor Diameter [Min | Buna-N |
| Pilot Type | 2200 |
| Port Size | 1.04 in |
| Port Type | SAE C, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Mounting Flange | 12/24 |
| Cover End RPM [Max | 2200 |
| Cover End Flow @ RPM | 2200 |
| Major Diameter [Max | N/A |
| Shaft Dia. | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 1.248 in |
| Weight | 1.247 in |
| Rotation | N/A |
| Shaft Key | N/A |
| Spline Description | N/A |
| Seal Material | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Max. RPM [Max | 4525VQ60A17-11BB20 |
| Relief Valve Setting | 3000 |
| Integral Valve Configuration | 2500 |
| Port Orientation - Cover End | 25.5 |
| Pressure Port Size, Cover End | 90 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 45° CCW from Inlet |
| Minor Diameter [Max | Outlet 90° CCW from Inlet |
| Port Orientation - Shaft End | 1 in Flange |
| Major Diameter [Min | 1 1/2 in Flange |
| Model No. | 3.37 |
| Pump Series | 11.8 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer