Made In China A2F Series Plunger Rexroth Axial Hydraulics Piston Pump Motor A2F63
| Port Orientation - Shaft End: | 76.0 LB |
| Weight: | Flange Mount |
| Minor Diameter: | Left Hand (CCW) |
| Spline Description: | 3525VQ38A21-11AA20-LH |
| Port Type: | 3 |
| Manufacturer Part No.: | Flange |
| Seal Material: | N/A |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Port Orientation - Shaft End | 76.0 LB |
| Weight | Flange Mount |
| Minor Diameter | Left Hand (CCW) |
| Spline Description | 3525VQ38A21-11AA20-LH |
| Port Type | 3 |
| Manufacturer Part No. | Flange |
| Seal Material | N/A |
| Relief Valve Setting | Standard Pilot |
| Mounting Flange | 1.25 in |
| Integral Valve Configuration | 14 Tooth Splined |
| Shaft Seal Type | 3525VQ |
| Shaft Key | 1.9375 in |
| Shaft Type | Double |
| Max. RPM [Max | Buna-N |
| Controlled Flow Rate | 2400 |
| Cover End Flow @ RPM | 1.04 in |
| Minor Diameter [Max | SAE C, 2 Bolt |
| Pilot Type | Single Shaft Seal |
| Shaft End RPM [Max | 12/24 |
| Pressure Port Size, Shaft End | 2500 |
| Shaft End Pressure [Max | 2400 |
| Cover End RPM [Max | N/A |
| Cover End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Length | 1.248 in |
| Shaft Dia. | 1.247 in |
| Major Diameter [Min | N/A |
| Pump Series | N/A |
| Shaft End Flow @ RPM | N/A |
| Pressure Port Size, Cover End | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 3525VQ38A21-11AA20-LH |
| Model No. | 3000 |
| Port Orientation - Cover End | 3000 |
| Rotation | 31.5 |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
| Major Diameter [Max | Outlet 135° CCW from Inlet |
| Mounting | Outlet Opposite Inlet |
| Displacement Cover End (cu in/revolution) | 1 in Flange |
| Port Size | 1 1/4 in Flange |
| Minor Diameter [Min | 4.1 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer