Hydraulic Gear Oil Pump 705-11-32530 for Bulldozer D61
| Minor Diameter [Max: | 35.0 LB |
| Shaft End Pressure [Max: | Flange Mount |
| Port Orientation - Cover End: | Right Hand (CW) |
| Seal Material: | V2020-1F12S7S-1CC30 |
| Rotation: | 2 |
| Port Size: | Flange |
| Displacement Shaft End (cu in/revolution): | 3/16 in |
| Spline Description: | N/A |
Product Details
| Minor Diameter [Max | 35.0 LB |
| Shaft End Pressure [Max | Flange Mount |
| Port Orientation - Cover End | Right Hand (CW) |
| Seal Material | V2020-1F12S7S-1CC30 |
| Rotation | 2 |
| Port Size | Flange |
| Displacement Shaft End (cu in/revolution) | 3/16 in |
| Spline Description | N/A |
| Shaft End RPM [Max | 0.875 in |
| Integral Valve Configuration | Straight w/ Key |
| Shaft Seal Type | V2020 |
| Major Diameter [Min | 2 5/16 in |
| Port Type | Buna-N |
| Cover End Flow @ RPM | 2400 |
| Weight | N/A |
| Cover End Pressure [Max | SAE B, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Mounting Flange | N/A |
| Pilot Type | 2500 |
| Displacement Cover End (cu in/revolution) | 2400 |
| Minor Diameter [Min | N/A |
| Shaft Dia. | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Minor Diameter | N/A |
| Major Diameter [Max | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Type | N/A |
| Pressure Port Size, Shaft End | N/A |
| Max. RPM [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Length | V2020-1F12S7S-1CC30 |
| Model No. | 2500 |
| Shaft Key | 2200 |
| Cover End RPM [Max | 10.5 |
| Manufacturer Part No. | 18 |
| Pressure Port Size, Cover End | N/A |
| GPM @ 1,800 rpm, Shaft End | Outlet Inline w/Inlet |
| Port Orientation - Shaft End | Outlet Inline w/Inlet |
| Mounting | 3/4 in SAE O-Ring |
| Controlled Flow Rate | 3/4 in SAE O-Ring |
| Relief Valve Setting | 1.39 |
| Pump Series | 2.38 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer