PC40-8 Hydraulic Pump Spare Parts Used PC40 Excavator
| Shaft Type: | 76.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Mounting: | Right Hand (CW) |
| Pilot Type: | 3525V30A21-11AA22R |
| Seal Material: | 3 |
| Port Orientation - Cover End: | Flange |
| Shaft Key: | N/A |
| Pump Series: | Standard Pilot |
| PDF |
|
Product Details
| Shaft Type | 76.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Mounting | Right Hand (CW) |
| Pilot Type | 3525V30A21-11AA22R |
| Seal Material | 3 |
| Port Orientation - Cover End | Flange |
| Shaft Key | N/A |
| Pump Series | Standard Pilot |
| Port Orientation - Shaft End | 1.375 in |
| Cover End Pressure [Max | 14 Tooth Splined |
| Max. RPM [Max | 3525V |
| Shaft End Pressure [Max | 2 5/16 in |
| Controlled Flow Rate | Buna-N |
| Port Size | 1800 |
| Shaft End Flow @ RPM | 1.055 in |
| Major Diameter [Min | SAE C, 2 Bolt |
| Pressure Port Size, Shaft End | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 12/24 |
| Major Diameter [Max | 1800 |
| Relief Valve Setting | 1800 |
| Port Type | N/A |
| Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 1.25 in |
| Shaft Seal Type | 1.247 in |
| Cover End Flow @ RPM | 1.06 in |
| Rotation | 1.05 in |
| Mounting Flange | N/A |
| Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Integral Valve Configuration | 3525V30A21-11AA22R |
| Weight | 2500 |
| Minor Diameter [Max | 2500 |
| Displacement Shaft End (cu in/revolution) | 31.5 |
| Shaft Dia. | 45 |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Pressure Port Size, Cover End | Outlet 135° CCW from Inlet |
| Shaft Length | Outlet Opposite Inlet |
| Manufacturer Part No. | 1 in Code 61 |
| Spline Description | 1 1/4 in Code 61 |
| Minor Diameter [Min | 4.1 |
| Cover End RPM [Max | 5.9 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer