PC60-7 Hydraulic Excavator 4D95 Engine Lubricating Oil Pump 6204-53-1100
| Shaft End RPM [Max: | 75.0 LB |
| Pump Series: | Flange Mount |
| Port Orientation - Cover End: | Left Hand (CCW) |
| Manufacturer Part No.: | 3520VQ30A8-11CC20LH |
| Max. RPM [Max: | 3 |
| Weight: | Flange |
| Pressure Port Size, Cover End: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
Product Details
| Shaft End RPM [Max | 75.0 LB |
| Pump Series | Flange Mount |
| Port Orientation - Cover End | Left Hand (CCW) |
| Manufacturer Part No. | 3520VQ30A8-11CC20LH |
| Max. RPM [Max | 3 |
| Weight | Flange |
| Pressure Port Size, Cover End | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Mounting Flange | 1.25 in |
| Minor Diameter [Max | 14 Tooth Splined |
| Displacement Cover End (cu in/revolution) | 3520VQ |
| Relief Valve Setting | 1.9375 in |
| Cover End Flow @ RPM | Buna-N |
| Rotation | 2500 |
| Pilot Type | 1.04 in |
| Minor Diameter | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Shaft Length | 12/24 |
| Cover End Pressure [Max | 2500 |
| Integral Valve Configuration | 2500 |
| Controlled Flow Rate | N/A |
| Shaft Key | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Spline Description | 1.248 in |
| GPM @ 1,800 rpm, Cover End | 1.247 in |
| Major Diameter [Max | N/A |
| Pressure Port Size, Shaft End | N/A |
| Cover End RPM [Max | N/A |
| Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 3520VQ30A8-11CC20LH |
| Shaft Type | 3000 |
| Shaft Dia. | 3000 |
| Port Size | 12 |
| Seal Material | 45 |
| Mounting | w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) | Outlet 45° CW from Inlet |
| Shaft End Pressure [Max | Outlet Inline w/Inlet |
| Major Diameter [Min | 3/4 in Flange |
| Minor Diameter [Min | 1 1/4 in Flange |
| Port Type | 1.67 |
| Shaft End Flow @ RPM | 5.96 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer