CAT Fuel Pump 217-8339 with Filter Base Set
| Pressure Port Size, Cover End: | 35.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Cover End Flow @ RPM: | Right Hand (CW) |
| Model No.: | V2020-1F8S6S-11CC30 |
| Shaft Length: | 2 |
| Minor Diameter [Min: | Flange |
| Mounting: | N/A |
| Major Diameter [Max: | N/A |
| PDF |
|
Product Details
| Pressure Port Size, Cover End | 35.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Cover End Flow @ RPM | Right Hand (CW) |
| Model No. | V2020-1F8S6S-11CC30 |
| Shaft Length | 2 |
| Minor Diameter [Min | Flange |
| Mounting | N/A |
| Major Diameter [Max | N/A |
| Shaft End RPM [Max | 0.875 in |
| Rotation | 13 Tooth Splined |
| Shaft Type | V2020 |
| Relief Valve Setting | 1 5/16 in |
| Shaft Key | Buna-N |
| Minor Diameter [Max | 2800 |
| Shaft End Flow @ RPM | 0.728 in |
| Pump Series | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Weight | 16/32 |
| Pilot Type | 3000 |
| Mounting Flange | 2800 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Controlled Flow Rate | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 0.873 in |
| Displacement Cover End (cu in/revolution) | 0.872 in |
| Pressure Port Size, Shaft End | 0.7335 in |
| Shaft Dia. | 0.7225 in |
| Shaft End Pressure [Max | N/A |
| Cover End RPM [Max | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Port Type | V2020-1F8S6S-11CC30 |
| Port Orientation - Cover End | 2500 |
| Spline Description | 2500 |
| Port Size | 9 |
| Major Diameter [Min | 12 |
| Integral Valve Configuration | N/A |
| Manufacturer Part No. | Outlet Inline w/Inlet |
| Minor Diameter | Outlet Inline w/Inlet |
| Cover End Pressure [Max | 3/4 in SAE O-Ring |
| Max. RPM [Max | 3/4 in SAE O-Ring |
| GPM @ 1,800 rpm, Shaft End | 1.19 |
| Seal Material | 1.62 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer