1465074 Hydraulic Vane Pump Cartridge For Caterpillar Wheel Loader 950G
| Port Type: | 15.0 LB |
| Cover End Pressure [Max: | Flange Mount |
| Seal Material: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: | 1 |
| Pump Series: | NPT |
| Controlled Flow Rate: | 3/16 in |
| Relief Valve Setting: | 20 |
| Shaft Length: | 3 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Port Type | 15.0 LB |
| Cover End Pressure [Max | Flange Mount |
| Seal Material | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End | 1 |
| Pump Series | NPT |
| Controlled Flow Rate | 3/16 in |
| Relief Valve Setting | 20 |
| Shaft Length | 3 gpm @ 1200 rpm |
| GPM @ 1,800 rpm, Shaft End | 0.75 in |
| Displacement Cover End (cu in/revolution) | Straight w/ Key |
| Integral Valve Configuration | 4.5 gpm @ 1800 rpm |
| Spline Description | V10 |
| Cover End RPM [Max | 1 3/4 in |
| Shaft Key | SAE-8 |
| Rotation | Buna-N |
| Shaft End Pressure [Max | 4000 |
| Minor Diameter [Max | 2500 psi |
| Pressure Port Size, Cover End | 4 1/2 |
| Shaft Seal Type | P |
| Weight | SAE A, 2 Bolt |
| Pressure Port Size, Shaft End | S |
| Shaft End RPM [Max | 1 |
| Shaft End Flow @ RPM | Opposite Inlet Port |
| Minor Diameter [Min | 0.6 |
| Port Orientation - Cover End | w/o Integral Valves |
| Major Diameter [Min | 1A |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer