Dump Truck and Paver Gear Hydraulic Oil Hand Pump 137-5541
| Pressure Port Size, Shaft End: | 75.0 LB |
| Pilot Type: | Flange Mount |
| Pressure Port Size, Cover End: | Right Hand (CW) |
| Weight: | 3520VQ30A5-11DD20 |
| Shaft End Flow @ RPM: | 3 |
| Shaft Dia.: | Flange |
| Seal Material: | N/A |
| Port Type: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 75.0 LB |
| Pilot Type | Flange Mount |
| Pressure Port Size, Cover End | Right Hand (CW) |
| Weight | 3520VQ30A5-11DD20 |
| Shaft End Flow @ RPM | 3 |
| Shaft Dia. | Flange |
| Seal Material | N/A |
| Port Type | Standard Pilot |
| Port Size | 1.25 in |
| Minor Diameter | 14 Tooth Splined |
| Major Diameter [Max | 3520VQ |
| Shaft End Pressure [Max | 1 15/16 in |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Integral Valve Configuration | 2500 |
| Max. RPM [Max | 1.04 in |
| Model No. | SAE C, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| Rotation | 12/24 |
| Cover End RPM [Max | 2500 |
| Relief Valve Setting | 2500 |
| Shaft Seal Type | N/A |
| Major Diameter [Min | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | 1.248 in |
| Mounting Flange | 1.247 in |
| Cover End Flow @ RPM | N/A |
| Shaft Key | N/A |
| Spline Description | N/A |
| Displacement Shaft End (cu in/revolution) | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft End RPM [Max | 3520VQ30A5-11DD20 |
| Port Orientation - Shaft End | 3000 |
| Shaft Length | 3000 |
| Manufacturer Part No. | 7.5 |
| Cover End Pressure [Max | 45 |
| Pump Series | w/o Integral Valves |
| Controlled Flow Rate | Outlet 135° CW from Inlet |
| Displacement Cover End (cu in/revolution) | Outlet 90° CW from Inlet |
| Shaft Type | 3/4 in Flange |
| Mounting | 1 1/4 in Flange |
| GPM @ 1,800 rpm, Cover End | 1.1 |
| Port Orientation - Cover End | 5.96 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer