Truck Use Gear Type Diesel Engine Pump 2331608 for Engine C13
| Displacement Shaft End (cu in/revolution): | 50.0 LB |
| Rotation: | Foot Mounted |
| Controlled Flow Rate: | Right Hand (CW) |
| Shaft End Flow @ RPM: | 35VQ25AF-1A20 |
| Shaft End Pressure [Max: | 2 |
| Integral Valve Configuration: | Flange |
| Relief Valve Setting: | 5/16 in |
| Shaft Dia.: | 20 |
Product Details
| Displacement Shaft End (cu in/revolution) | 50.0 LB |
| Rotation | Foot Mounted |
| Controlled Flow Rate | Right Hand (CW) |
| Shaft End Flow @ RPM | 35VQ25AF-1A20 |
| Shaft End Pressure [Max | 2 |
| Integral Valve Configuration | Flange |
| Relief Valve Setting | 5/16 in |
| Shaft Dia. | 20 |
| Weight | 25 gpm @ 1200 rpm |
| Shaft Key | 1 |
| Pilot Type | 1.25 in |
| Pump Series | Straight w/ Key |
| Pressure Port Size, Cover End | 37.5 gpm @ 1800 rpm |
| Max. RPM [Max | 35VQ |
| Port Orientation - Shaft End | 2.88 in |
| Shaft Seal Type | F |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Mounting | Buna-N |
| GPM @ 1,800 rpm, Cover End | 2500 |
| Spline Description | 3000 psi |
| Cover End RPM [Max | 37 1/2 |
| Cover End Flow @ RPM | A |
| Mounting Flange | SAE C, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Displacement Cover End (cu in/revolution) | Opposite Inlet Port |
| Major Diameter [Min | 35VQ25AF-1A20 |
| Cover End Pressure [Max | 4.98 |
| Shaft Length | w/o Integral Valves |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer