103-1433-012/103-1433 BMRS375 Hydraulic Motor Used In Drilling Rig
| Manufacturer Part No.: | 76.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Major Diameter [Max: | Right Hand (CW) |
| Port Orientation - Cover End: | 3525VQ38A14-11AA20 |
| Shaft End Pressure [Max: | 3 |
| Minor Diameter [Min: | Flange |
| Minor Diameter [Max: | N/A |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Manufacturer Part No. | 76.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Major Diameter [Max | Right Hand (CW) |
| Port Orientation - Cover End | 3525VQ38A14-11AA20 |
| Shaft End Pressure [Max | 3 |
| Minor Diameter [Min | Flange |
| Minor Diameter [Max | N/A |
| Relief Valve Setting | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| Displacement Cover End (cu in/revolution) | 14 Tooth Splined |
| Port Orientation - Shaft End | 3525VQ |
| Seal Material | 1 15/16 in |
| Model No. | Double |
| Shaft Seal Type | Buna-N |
| Shaft Dia. | 2400 |
| Minor Diameter | 1.04 in |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| Mounting | Single Shaft Seal |
| Cover End Flow @ RPM | 12/24 |
| GPM @ 1,800 rpm, Cover End | 2500 |
| Major Diameter [Min | 2400 |
| Pressure Port Size, Shaft End | N/A |
| Shaft Key | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Cover End RPM [Max | 1.248 in |
| Shaft End RPM [Max | 1.247 in |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Mounting Flange | N/A |
| Pressure Port Size, Cover End | N/A |
| Max. RPM [Max | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Port Size | 3525VQ38A14-11AA20 |
| Controlled Flow Rate | 3000 |
| Shaft Type | 3000 |
| Rotation | 21 |
| Spline Description | 57 |
| Pilot Type | w/o Integral Valves |
| Weight | Outlet 135° CCW from Inlet |
| Port Type | Outlet Opposite Inlet |
| Shaft Length | 1 in Flange |
| Integral Valve Configuration | 1 1/4 in Flange |
| Pump Series | 2.8 |
PL42 PL44 Piston Shoe Hydraulic Motor Poclain Spare Parts