Excavator PC40 Hydraulic Oil Gear Pumps 705-41-01920
| Minor Diameter [Max: | 45.0 LB |
| Cover End Pressure [Max: | Flange Mount |
| Mounting Flange: | Right Hand (CW) |
| Port Size: | 2520V21A14-11CB22R |
| Shaft Key: | 2 1/2 |
| Pressure Port Size, Cover End: | Flange |
| Shaft Seal Type: | N/A |
| Port Orientation - Cover End: | Standard Pilot |
Product Details
| Minor Diameter [Max | 45.0 LB |
| Cover End Pressure [Max | Flange Mount |
| Mounting Flange | Right Hand (CW) |
| Port Size | 2520V21A14-11CB22R |
| Shaft Key | 2 1/2 |
| Pressure Port Size, Cover End | Flange |
| Shaft Seal Type | N/A |
| Port Orientation - Cover End | Standard Pilot |
| Displacement Shaft End (cu in/revolution) | 1.09 in |
| Weight | 13 Tooth Splined |
| Integral Valve Configuration | 2520V |
| GPM @ 1,800 rpm, Shaft End | 1 3/4 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Minor Diameter | 1800 |
| Spline Description | 0.7285 in |
| Major Diameter [Min | SAE B, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Rotation | 16/32 |
| Pump Series | 1800 |
| Mounting | 1800 |
| Major Diameter [Max | N/A |
| Shaft Length | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 0.873 in |
| Minor Diameter [Min | 0.872 in |
| Pilot Type | 0.734 in |
| Displacement Cover End (cu in/revolution) | 0.723 in |
| Cover End Flow @ RPM | N/A |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 2520V21A14-11CB22R |
| Model No. | 3000 |
| Seal Material | 2500 |
| Controlled Flow Rate | 21 |
| Port Type | 31.5 |
| Relief Valve Setting | N/A |
| Cover End RPM [Max | Outlet 45° CCW from Inlet |
| Shaft End Pressure [Max | Outlet Inline w/Inlet |
| Shaft Type | 3/4 in Code 61 |
| Manufacturer Part No. | 1 in Code 61 |
| Max. RPM [Max | 2.8 |
| Shaft Dia. | 4.1 |
PL42 PL44 Piston Shoe Hydraulic Motor Poclain Spare Parts