New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
| Displacement Shaft End (cu in/revolution): | 76.0 LB |
| Port Type: | Flange Mount |
| Seal Material: | Left Hand (CCW) |
| Shaft Length: | 3525VQ38A21-11AD20L |
| Mounting: | 3 |
| Pressure Port Size, Cover End: | Flange |
| Minor Diameter [Min: | N/A |
| Cover End RPM [Max: | Standard Pilot |
Product Details
| Displacement Shaft End (cu in/revolution) | 76.0 LB |
| Port Type | Flange Mount |
| Seal Material | Left Hand (CCW) |
| Shaft Length | 3525VQ38A21-11AD20L |
| Mounting | 3 |
| Pressure Port Size, Cover End | Flange |
| Minor Diameter [Min | N/A |
| Cover End RPM [Max | Standard Pilot |
| Max. RPM [Max | 1.25 in |
| Manufacturer Part No. | 14 Tooth Splined |
| Shaft Key | 3525VQ |
| Cover End Pressure [Max | 1.9375 in |
| Cover End Flow @ RPM | Buna-N |
| Rotation | 2400 |
| GPM @ 1,800 rpm, Cover End | 1.04 in |
| Displacement Cover End (cu in/revolution) | SAE C, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Pressure Port Size, Shaft End | 12/24 |
| Port Orientation - Cover End | 2500 |
| GPM @ 1,800 rpm, Shaft End | 2400 |
| Pump Series | N/A |
| Controlled Flow Rate | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pilot Type | 1.248 in |
| Shaft End Flow @ RPM | 1.247 in |
| Minor Diameter [Max | N/A |
| Shaft Dia. | N/A |
| Mounting Flange | N/A |
| Relief Valve Setting | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Major Diameter [Max | 3525VQ38A21-11AD20L |
| Weight | 3000 |
| Shaft End Pressure [Max | 3000 |
| Spline Description | 31.5 |
| Model No. | 57 |
| Minor Diameter | w/o Integral Valves |
| Port Size | Outlet 135° CW from Inlet |
| Integral Valve Configuration | Outlet Opposite Inlet |
| Shaft Seal Type | 1 in Flange |
| Shaft Type | 1 1/4 in Flange |
| Port Orientation - Shaft End | 4.12 |
| Major Diameter [Min | 7.42 |
PL42 PL44 Piston Shoe Hydraulic Motor Poclain Spare Parts