225-8016 CAT Backhoe Loaders Water Pump fits for 416D 420D 422E 424D 428D 432D 434E 442D
| Manufacturer Part No.: | 30.0 LB |
| Mounting: | Flange Mount |
| Shaft Key: | Right Hand (CW) |
| Cover End Pressure [Max: | V2010-1F11S2S-11CC12 |
| Pump Series: | 1 1/2 |
| Cover End RPM [Max: | Flange |
| Controlled Flow Rate: | N/A |
| Max. RPM [Max: | N/A |
Product Details
| Manufacturer Part No. | 30.0 LB |
| Mounting | Flange Mount |
| Shaft Key | Right Hand (CW) |
| Cover End Pressure [Max | V2010-1F11S2S-11CC12 |
| Pump Series | 1 1/2 |
| Cover End RPM [Max | Flange |
| Controlled Flow Rate | N/A |
| Max. RPM [Max | N/A |
| Pressure Port Size, Shaft End | 0.875 in |
| Port Size | 13 Tooth Splined |
| Shaft End RPM [Max | V2010 |
| Shaft End Flow @ RPM | 1.3125 in |
| Relief Valve Setting | Buna-N |
| Minor Diameter [Max | 2500 |
| Port Type | 0.728 in |
| Pilot Type | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Shaft Dia. | 16/32 |
| Model No. | 3000 |
| Minor Diameter | 2500 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Spline Description | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | 0.873 in |
| Seal Material | 0.872 in |
| Displacement Cover End (cu in/revolution) | 0.7335 in |
| Port Orientation - Shaft End | 0.7225 in |
| Cover End Flow @ RPM | N/A |
| Integral Valve Configuration | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | V2010-1F11S2S-11CC12 |
| Rotation | 2500 |
| GPM @ 1,800 rpm, Cover End | 2500 |
| GPM @ 1,800 rpm, Shaft End | 3 |
| Shaft Length | 16.5 |
| Mounting Flange | N/A |
| Major Diameter [Min | Outlet 45° CW from Inlet |
| Shaft Type | Outlet Inline w/Inlet |
| Major Diameter [Max | 1/2 in SAE O-Ring |
| Port Orientation - Cover End | 3/4 in SAE O-Ring |
| Weight | 0.4 |
| Shaft End Pressure [Max | 2.22 |
PL42 PL44 Piston Shoe Hydraulic Motor Poclain Spare Parts