DEUTZ 0 445 110 362/363 injector
What is DEUTZ 0 445 110 362/363 injector in mechanical engineering? DEUTZ injector Manufacturing Service . 1 Piece Solid Housing Configuration Upload your CAD file for Cast Steel Housing Material an instant.
Brand Name: | DEUTZ |
Model Number: | 0 445 110 362/363 |
Model No.: | 35.0 LB |
Cover End RPM [Max: | Flange Mount |
Shaft Seal Type: | Right Hand (CW) |
Shaft Key: | V2020-1F9S7S-11AA30 |
Rotation: | 2 |
Relief Valve Setting: | Flange |
Displacement Shaft End (cu in/revolution): | 1.8 |
Displacement Cover End (cu in/revolution): | N/A |
Product Details
Model No. | 35.0 LB |
Cover End RPM [Max | Flange Mount |
Shaft Seal Type | Right Hand (CW) |
Shaft Key | V2020-1F9S7S-11AA30 |
Rotation | 2 |
Relief Valve Setting | Flange |
Displacement Shaft End (cu in/revolution) | 1.8 |
Displacement Cover End (cu in/revolution) | N/A |
Manufacturer Part No. | 0.875 in |
Minor Diameter [Min | 13 Tooth Splined |
Pilot Type | V2020 |
Shaft Length | 1 5/16 in |
Minor Diameter | Double |
Shaft Dia. | Buna-N |
Pressure Port Size, Cover End | 2800 |
Max. RPM [Max | 0.728 in |
Cover End Flow @ RPM | SAE B, 2 Bolt |
Major Diameter [Max | Single Shaft Seal |
Cover End Pressure [Max | 16/32 |
Shaft End RPM [Max | 2500 |
Port Orientation - Shaft End | 2800 |
Port Size | N/A |
Shaft Type | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Mounting | 0.873 in |
Pressure Port Size, Shaft End | 0.872 in |
GPM @ 1,800 rpm, Shaft End | 0.734 in |
Integral Valve Configuration | 0.723 in |
Mounting Flange | N/A |
Port Orientation - Cover End | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Controlled Flow Rate | V2020-1F9S7S-11AA30 |
Spline Description | 2500 |
Shaft End Pressure [Max | 2500 |
Port Type | 10.5 |
Weight | 13.5 |
Minor Diameter [Max | N/A |
GPM @ 1,800 rpm, Cover End | Outlet Opposite Inlet |
Shaft End Flow @ RPM | Outlet Opposite Inlet |
Pump Series | 3/4 in SAE O-Ring |
Major Diameter [Min | 3/4 in SAE O-Ring |
Seal Material | 1.4 |