103-1433-012/103-1433 BMRS375 Hydraulic Motor Used In Drilling Rig
| Manufacturer Part No.: |
76.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Major Diameter [Max: |
Right Hand (CW) |
| Port Orientation - Cover End: |
3525VQ38A14-11AA20 |
| Shaft End Pressure [Max: |
3 |
| Minor Diameter [Min: |
Flange |
| Minor Diameter [Max: |
N/A |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Manufacturer Part No. |
76.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Major Diameter [Max |
Right Hand (CW) |
| Port Orientation - Cover End |
3525VQ38A14-11AA20 |
| Shaft End Pressure [Max |
3 |
| Minor Diameter [Min |
Flange |
| Minor Diameter [Max |
N/A |
| Relief Valve Setting |
Standard Pilot |
| GPM @ 1,800 rpm, Shaft End |
1.25 in |
| Displacement Cover End (cu in/revolution) |
14 Tooth Splined |
| Port Orientation - Shaft End |
3525VQ |
| Seal Material |
1 15/16 in |
| Model No. |
Double |
| Shaft Seal Type |
Buna-N |
| Shaft Dia. |
2400 |
| Minor Diameter |
1.04 in |
| Cover End Pressure [Max |
SAE C, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Cover End Flow @ RPM |
12/24 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Major Diameter [Min |
2400 |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Key |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Cover End RPM [Max |
1.248 in |
| Shaft End RPM [Max |
1.247 in |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Mounting Flange |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Max. RPM [Max |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Port Size |
3525VQ38A14-11AA20 |
| Controlled Flow Rate |
3000 |
| Shaft Type |
3000 |
| Rotation |
21 |
| Spline Description |
57 |
| Pilot Type |
w/o Integral Valves |
| Weight |
Outlet 135° CCW from Inlet |
| Port Type |
Outlet Opposite Inlet |
| Shaft Length |
1 in Flange |
| Integral Valve Configuration |
1 1/4 in Flange |
| Pump Series |
2.8 |