Dump Truck Lifting Hydraulic Gear Pump KP1403A
| Minor Diameter: |
35.0 LB |
| Shaft Seal Type: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Pressure Port Size, Cover End: |
V2020-1F13S7S-11BB30 |
| Controlled Flow Rate: |
2 |
| Port Orientation - Shaft End: |
Flange |
| Major Diameter [Min: |
N/A |
| Pressure Port Size, Shaft End: |
N/A |
| PDF |
|
Product Details
| Minor Diameter |
35.0 LB |
| Shaft Seal Type |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Pressure Port Size, Cover End |
V2020-1F13S7S-11BB30 |
| Controlled Flow Rate |
2 |
| Port Orientation - Shaft End |
Flange |
| Major Diameter [Min |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Model No. |
0.875 in |
| Manufacturer Part No. |
13 Tooth Splined |
| Seal Material |
V2020 |
| Shaft Type |
1.3125 in |
| Minor Diameter [Max |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2400 |
| Mounting |
0.728 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Major Diameter [Max |
Single Shaft Seal |
| Minor Diameter [Min |
16/32 |
| Pilot Type |
2500 |
| Integral Valve Configuration |
2400 |
| Shaft End RPM [Max |
N/A |
| Shaft Dia. |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Spline Description |
0.873 in |
| Port Type |
0.872 in |
| Weight |
0.7335 in |
| Relief Valve Setting |
0.7225 in |
| Cover End RPM [Max |
N/A |
| Shaft End Pressure [Max |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
V2020-1F13S7S-11BB30 |
| Port Size |
2500 |
| Shaft Key |
2200 |
| Cover End Flow @ RPM |
10.5 |
| Shaft Length |
19.5 |
| Pump Series |
N/A |
| Port Orientation - Cover End |
Outlet 90° CCW from Inlet |
| Rotation |
Outlet 90° CCW from Inlet |
| Cover End Pressure [Max |
3/4 in SAE O-Ring |
| GPM @ 1,800 rpm, Cover End |
3/4 in SAE O-Ring |
| GPM @ 1,800 rpm, Shaft End |
1.39 |
| Displacement Shaft End (cu in/revolution) |
2.59 |