20V/25V/35V/45V Hydraulic Vane Pump Drive Shaft Oil Seal
| Minor Diameter: |
15.0 LB |
| Shaft Seal Type: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Spline Description: |
SAE-16 |
| Integral Valve Configuration: |
SAE |
| Shaft Key: |
N/A |
| Port Type: |
20 |
| Weight: |
4 gpm @ 1200 rpm |
Product Details
| Minor Diameter |
15.0 LB |
| Shaft Seal Type |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Spline Description |
SAE-16 |
| Integral Valve Configuration |
SAE |
| Shaft Key |
N/A |
| Port Type |
20 |
| Weight |
4 gpm @ 1200 rpm |
| Pilot Type |
0.73 in |
| Max. RPM [Max |
11 Tooth Splined |
| Shaft End Pressure [Max |
6 gpm @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
V10 |
| Shaft Length |
1 1/4 in |
| GPM @ 1,800 rpm, Cover End |
SAE-8 |
| Seal Material |
Buna-N |
| Shaft Dia. |
3400 |
| Cover End RPM [Max |
2500 psi |
| Port Orientation - Cover End |
6 |
| Relief Valve Setting |
S |
| Cover End Pressure [Max |
SAE A, 2 Bolt |
| Major Diameter [Min |
S |
| Pressure Port Size, Cover End |
1 |
| Pump Series |
90° CCW from Inlet |
| Cover End Flow @ RPM |
0.8 |
| Major Diameter [Max |
w/o Integral Valves |
| Model No. |
38B |