Excavator PC40 Hydraulic Oil Gear Pumps 705-41-01920
| Minor Diameter [Max: |
45.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Mounting Flange: |
Right Hand (CW) |
| Port Size: |
2520V21A14-11CB22R |
| Shaft Key: |
2 1/2 |
| Pressure Port Size, Cover End: |
Flange |
| Shaft Seal Type: |
N/A |
| Port Orientation - Cover End: |
Standard Pilot |
Product Details
| Minor Diameter [Max |
45.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Mounting Flange |
Right Hand (CW) |
| Port Size |
2520V21A14-11CB22R |
| Shaft Key |
2 1/2 |
| Pressure Port Size, Cover End |
Flange |
| Shaft Seal Type |
N/A |
| Port Orientation - Cover End |
Standard Pilot |
| Displacement Shaft End (cu in/revolution) |
1.09 in |
| Weight |
13 Tooth Splined |
| Integral Valve Configuration |
2520V |
| GPM @ 1,800 rpm, Shaft End |
1 3/4 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Minor Diameter |
1800 |
| Spline Description |
0.7285 in |
| Major Diameter [Min |
SAE B, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Rotation |
16/32 |
| Pump Series |
1800 |
| Mounting |
1800 |
| Major Diameter [Max |
N/A |
| Shaft Length |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
0.873 in |
| Minor Diameter [Min |
0.872 in |
| Pilot Type |
0.734 in |
| Displacement Cover End (cu in/revolution) |
0.723 in |
| Cover End Flow @ RPM |
N/A |
| Shaft End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
2520V21A14-11CB22R |
| Model No. |
3000 |
| Seal Material |
2500 |
| Controlled Flow Rate |
21 |
| Port Type |
31.5 |
| Relief Valve Setting |
N/A |
| Cover End RPM [Max |
Outlet 45° CCW from Inlet |
| Shaft End Pressure [Max |
Outlet Inline w/Inlet |
| Shaft Type |
3/4 in Code 61 |
| Manufacturer Part No. |
1 in Code 61 |
| Max. RPM [Max |
2.8 |
| Shaft Dia. |
4.1 |