225-8016 CAT Backhoe Loaders Water Pump fits for 416D 420D 422E 424D 428D 432D 434E 442D
| Manufacturer Part No.: |
30.0 LB |
| Mounting: |
Flange Mount |
| Shaft Key: |
Right Hand (CW) |
| Cover End Pressure [Max: |
V2010-1F11S2S-11CC12 |
| Pump Series: |
1 1/2 |
| Cover End RPM [Max: |
Flange |
| Controlled Flow Rate: |
N/A |
| Max. RPM [Max: |
N/A |
Product Details
| Manufacturer Part No. |
30.0 LB |
| Mounting |
Flange Mount |
| Shaft Key |
Right Hand (CW) |
| Cover End Pressure [Max |
V2010-1F11S2S-11CC12 |
| Pump Series |
1 1/2 |
| Cover End RPM [Max |
Flange |
| Controlled Flow Rate |
N/A |
| Max. RPM [Max |
N/A |
| Pressure Port Size, Shaft End |
0.875 in |
| Port Size |
13 Tooth Splined |
| Shaft End RPM [Max |
V2010 |
| Shaft End Flow @ RPM |
1.3125 in |
| Relief Valve Setting |
Buna-N |
| Minor Diameter [Max |
2500 |
| Port Type |
0.728 in |
| Pilot Type |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Shaft Dia. |
16/32 |
| Model No. |
3000 |
| Minor Diameter |
2500 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Spline Description |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
0.873 in |
| Seal Material |
0.872 in |
| Displacement Cover End (cu in/revolution) |
0.7335 in |
| Port Orientation - Shaft End |
0.7225 in |
| Cover End Flow @ RPM |
N/A |
| Integral Valve Configuration |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
V2010-1F11S2S-11CC12 |
| Rotation |
2500 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| GPM @ 1,800 rpm, Shaft End |
3 |
| Shaft Length |
16.5 |
| Mounting Flange |
N/A |
| Major Diameter [Min |
Outlet 45° CW from Inlet |
| Shaft Type |
Outlet Inline w/Inlet |
| Major Diameter [Max |
1/2 in SAE O-Ring |
| Port Orientation - Cover End |
3/4 in SAE O-Ring |
| Weight |
0.4 |
| Shaft End Pressure [Max |
2.22 |