DEUTZ 0 445 110 362/363 injector
What is DEUTZ 0 445 110 362/363 injector in mechanical engineering? DEUTZ injector Manufacturing Service . 1 Piece Solid Housing Configuration Upload your CAD file for Cast Steel Housing Material an instant.
Brand Name: |
DEUTZ |
Model Number: |
0 445 110 362/363 |
Model No.: |
35.0 LB |
Cover End RPM [Max: |
Flange Mount |
Shaft Seal Type: |
Right Hand (CW) |
Shaft Key: |
V2020-1F9S7S-11AA30 |
Rotation: |
2 |
Relief Valve Setting: |
Flange |
Displacement Shaft End (cu in/revolution): |
1.8 |
Displacement Cover End (cu in/revolution): |
N/A |
Product Details
Model No. |
35.0 LB |
Cover End RPM [Max |
Flange Mount |
Shaft Seal Type |
Right Hand (CW) |
Shaft Key |
V2020-1F9S7S-11AA30 |
Rotation |
2 |
Relief Valve Setting |
Flange |
Displacement Shaft End (cu in/revolution) |
1.8 |
Displacement Cover End (cu in/revolution) |
N/A |
Manufacturer Part No. |
0.875 in |
Minor Diameter [Min |
13 Tooth Splined |
Pilot Type |
V2020 |
Shaft Length |
1 5/16 in |
Minor Diameter |
Double |
Shaft Dia. |
Buna-N |
Pressure Port Size, Cover End |
2800 |
Max. RPM [Max |
0.728 in |
Cover End Flow @ RPM |
SAE B, 2 Bolt |
Major Diameter [Max |
Single Shaft Seal |
Cover End Pressure [Max |
16/32 |
Shaft End RPM [Max |
2500 |
Port Orientation - Shaft End |
2800 |
Port Size |
N/A |
Shaft Type |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Mounting |
0.873 in |
Pressure Port Size, Shaft End |
0.872 in |
GPM @ 1,800 rpm, Shaft End |
0.734 in |
Integral Valve Configuration |
0.723 in |
Mounting Flange |
N/A |
Port Orientation - Cover End |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Controlled Flow Rate |
V2020-1F9S7S-11AA30 |
Spline Description |
2500 |
Shaft End Pressure [Max |
2500 |
Port Type |
10.5 |
Weight |
13.5 |
Minor Diameter [Max |
N/A |
GPM @ 1,800 rpm, Cover End |
Outlet Opposite Inlet |
Shaft End Flow @ RPM |
Outlet Opposite Inlet |
Pump Series |
3/4 in SAE O-Ring |
Major Diameter [Min |
3/4 in SAE O-Ring |
Seal Material |
1.4 |