Rexroth R901093768 PVV1-1X/046RA15DVB Vane pump Cross Reference | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | r | R | T | d | D | B | C | Cr |
| 4046 | Ruville | - | - | - | - | - | - | - | - |
| VKHB 2046 | SKF | - | - | - | 75,000 | 115,000 | - | - | - |
| ZB1.20.0465.200-1RPTN | ISB | - | - | - | 379 mm | 535 mm | - | - | - |
| WJ-404616 | NSK | - | - | - | 63,5 | 73,025 | - | 55,5 kN | - |
| WJ-404620 | KOYO | - | - | - | 63.500 | 73.025 | - | 69.8 kN | 69.8 |
| WJ-404624 | NSK | - | - | - | 63,5 | 73,025 | - | 82,5 kN | - |
| TPK3046L-3 | KOYO | - | - | - | 30,1 mm | 45,5 mm | - | 14,1 kN | - |
| SX0469 | NTN | - | - | - | 20,000 mm | 47,000 mm | 14,000 mm | 14,000 mm | - |
| CX046 | Loyal | - | - | - | - | - | - | - | - |
| NP604623/NP335170 | Timken | - | - | 15 mm | 60 mm | 107 mm | 15,25 mm | 10,5 mm | - |
| NP604623/NP577617 | Timken | 0,8 mm | 1,5 mm | 15 mm | 60 mm | 89 mm | 15,25 mm | 10,5 mm | - |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Rotation:45.0 LB; Port Orientation - Cover End:Flange Mount; Mounting Flange:Left Hand (CCW); Minor Diameter [Min:2520VQ17A5-1AA20-LH; Displacement Shaft End (cu in/revolution):2 1/2; Cover End Flow @ RPM:Flange; Shaft End RPM [Max:3/16 in; Seal Material:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Port Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Manufacturer Part No.:45.0 LB; Mounting Flange:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Major Diameter [Min:2520VQ17A5-1AA20-LH; Pressure Port Size, Cover End:2 1/2; Relief Valve Setting:Flange; Port Size:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Seal Material:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Mounting:45.0 LB; Spline Description:Flange Mount; Shaft Type:Left Hand (CCW); Displacement Cover End (cu in/revolution):2520VQ17A5-1AA20-LH; Minor Diameter:2 1/2; Major Diameter [Min:Flange; Major Diameter [Max:3/16 in; Pressure Port Size, Cover End:Standard Pilot; Minor Diameter [Min:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Displacement Shaft End (cu in/revolution):45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Port Type:2520VQ17A5-1AA20-LH; Displacement Cover End (cu in/revolution):2 1/2; Major Diameter [Max:Flange; Seal Material:3/16 in; Shaft End RPM [Max:Standard Pilot; Pressure Port Size, Cover End:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Relief Valve Setting:45.0 LB; Manufacturer Part No.:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Weight:2520VQ17A5-1AA20-LH; Controlled Flow Rate:2 1/2; Shaft Length:Flange; Seal Material:3/16 in; Mounting Flange:Standard Pilot; Major Diameter [Min:0.875 in; Port Size:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | GPM @ 1,800 rpm, Shaft End:45.0 LB; Minor Diameter [Min:Flange Mount; Port Type:Left Hand (CCW); Rotation:2520VQ17A5-1AA20-LH; Pressure Port Size, Cover End:2 1/2; Integral Valve Configuration:Flange; Controlled Flow Rate:3/16 in; Minor Diameter [Max:Standard Pilot; Cover End RPM [Max:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Displacement Cover End (cu in/revolution):45.0 LB; Port Orientation - Shaft End:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Rotation:2520VQ17A5-1AA20-LH; Shaft End Flow @ RPM:2 1/2; Minor Diameter:Flange; Shaft Length:3/16 in; Cover End RPM [Max:Standard Pilot; Minor Diameter [Max:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Port Type:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Rotation:Left Hand (CCW); Controlled Flow Rate:2520VQ17A5-1AA20-LH; Minor Diameter [Min:2 1/2; Shaft End Flow @ RPM:Flange; Cover End RPM [Max:3/16 in; Mounting:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft Length:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A5-1AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.37; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth R901093768 PVV1-1X/046RA15DVB Vane pump Video