HGP-3A HGP3A Hydraulic Gear Pump HGP For Small Cylinder
| Mounting Flange: | 75.0 LB |
| Integral Valve Configuration: | Flange Mount |
| GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): | 6 |
| Minor Diameter [Max: | 3 |
| Shaft Length: | Flange |
| Weight: | 5/16 in |
| Cover End Flow @ RPM: | Standard Pilot |
| PDF |
|
Product Details
| Mounting Flange | 75.0 LB |
| Integral Valve Configuration | Flange Mount |
| GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) | 6 |
| Minor Diameter [Max | 3 |
| Shaft Length | Flange |
| Weight | 5/16 in |
| Cover End Flow @ RPM | Standard Pilot |
| Rotation | 1.25 in |
| Shaft Type | Straight w/ Key |
| Cover End Pressure [Max | 3520VQ |
| Displacement Cover End (cu in/revolution) | 2 1/2 in |
| Manufacturer Part No. | Double |
| Shaft Seal Type | Buna-N |
| Relief Valve Setting | 2500 |
| Shaft End RPM [Max | N/A |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Seal Material | N/A |
| Model No. | 2500 |
| Pump Series | 2500 |
| Port Size | N/A |
| Port Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | N/A |
| Mounting | N/A |
| Controlled Flow Rate | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter | N/A |
| Shaft End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Pilot Type | 3520VQ30A11-1CC20 |
| Major Diameter [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 3000 |
| Port Orientation - Shaft End | 16.5 |
| Shaft Dia. | 45 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Spline Description | Outlet 45° CW from Inlet |
| Minor Diameter [Min | Outlet Inline w/Inlet |
| Shaft End Pressure [Max | 3/4 in Flange |
| Port Orientation - Cover End | 1 1/4 in Flange |
| Shaft Key | 2.2 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692