Replacement Atos PFE PFED Hydraulic Pump for Injection Moulding Machinery
| Shaft Seal Type: | 101.0 LB |
| Port Type: | Flange Mount |
| Shaft End RPM [Max: | Right Hand (CW) |
| Shaft Type: | 4525VQ60A17-11BB20 |
| Shaft Dia.: | 3 1/2 |
| Port Size: | Flange |
| Major Diameter [Min: | N/A |
| Displacement Shaft End (cu in/revolution): | Standard Pilot |
Product Details
| Shaft Seal Type | 101.0 LB |
| Port Type | Flange Mount |
| Shaft End RPM [Max | Right Hand (CW) |
| Shaft Type | 4525VQ60A17-11BB20 |
| Shaft Dia. | 3 1/2 |
| Port Size | Flange |
| Major Diameter [Min | N/A |
| Displacement Shaft End (cu in/revolution) | Standard Pilot |
| Pressure Port Size, Shaft End | 1.25 in |
| Pump Series | 14 Tooth Splined |
| Relief Valve Setting | 4525VQ |
| Model No. | 1.9375 in |
| Weight | Buna-N |
| Displacement Cover End (cu in/revolution) | 2200 |
| Pressure Port Size, Cover End | 1.04 in |
| Minor Diameter [Min | SAE C, 2 Bolt |
| Pilot Type | Single Shaft Seal |
| Major Diameter [Max | 12/24 |
| Integral Valve Configuration | 2200 |
| Cover End RPM [Max | 2200 |
| Port Orientation - Cover End | N/A |
| Mounting | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 1.248 in |
| Seal Material | 1.247 in |
| Shaft Length | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Controlled Flow Rate | N/A |
| Cover End Pressure [Max | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Minor Diameter [Max | 4525VQ60A17-11BB20 |
| Max. RPM [Max | 3000 |
| Shaft End Pressure [Max | 2500 |
| Rotation | 25.5 |
| Minor Diameter | 90 |
| Spline Description | w/o Integral Valves |
| Mounting Flange | Outlet 45° CCW from Inlet |
| Shaft Key | Outlet 90° CCW from Inlet |
| Cover End Flow @ RPM | 1 in Flange |
| Port Orientation - Shaft End | 1 1/2 in Flange |
| Shaft End Flow @ RPM | 3.37 |
| GPM @ 1,800 rpm, Cover End | 11.8 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692