6754-71-1012 / 6754-71-7200 Fuel Injection Pump Assembly for PC240-8 PC200-8
| Seal Material: | 76.0 LB |
| Shaft Key: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Controlled Flow Rate: | 3525VQ35A21-11DD20 |
| Relief Valve Setting: | 3 |
| Cover End Pressure [Max: | Flange |
| Shaft Length: | N/A |
| Shaft End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| Seal Material | 76.0 LB |
| Shaft Key | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Controlled Flow Rate | 3525VQ35A21-11DD20 |
| Relief Valve Setting | 3 |
| Cover End Pressure [Max | Flange |
| Shaft Length | N/A |
| Shaft End Pressure [Max | Standard Pilot |
| Displacement Shaft End (cu in/revolution) | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Shaft End Flow @ RPM | 3525VQ |
| Pressure Port Size, Cover End | 1.9375 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Cover End Flow @ RPM | 2400 |
| Major Diameter [Max | 1.04 in |
| Integral Valve Configuration | SAE C, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| Pilot Type | 12/24 |
| Cover End RPM [Max | 2500 |
| Shaft Seal Type | 2400 |
| Displacement Cover End (cu in/revolution) | N/A |
| Shaft End RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Dia. | 1.248 in |
| Model No. | 1.247 in |
| Minor Diameter [Max | N/A |
| Port Type | N/A |
| Minor Diameter | N/A |
| Mounting Flange | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Rotation | 3525VQ35A21-11DD20 |
| Major Diameter [Min | 3000 |
| Port Orientation - Cover End | 3000 |
| Spline Description | 31.5 |
| Max. RPM [Max | 52.5 |
| GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
| Port Size | Outlet 135° CW from Inlet |
| Pump Series | Outlet 90° CW from Inlet |
| Port Orientation - Shaft End | 1 in Flange |
| Weight | 1 1/4 in Flange |
| Mounting | 4.12 |
| Manufacturer Part No. | 6.88 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692