CAT Excavator Diesel Engine Water Thermostat 247-7133
| Port Orientation - Cover End: | 45.0 LB |
| Minor Diameter [Min: | Flange Mount |
| Shaft End Pressure [Max: | Right Hand (CW) |
| Pressure Port Size, Shaft End: | 2520V21A8-86DD22R |
| Shaft End Flow @ RPM: | 2.5 |
| Seal Material: | Flange |
| GPM @ 1,800 rpm, Shaft End: | 1/4 in |
| Pressure Port Size, Cover End: | Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End | 45.0 LB |
| Minor Diameter [Min | Flange Mount |
| Shaft End Pressure [Max | Right Hand (CW) |
| Pressure Port Size, Shaft End | 2520V21A8-86DD22R |
| Shaft End Flow @ RPM | 2.5 |
| Seal Material | Flange |
| GPM @ 1,800 rpm, Shaft End | 1/4 in |
| Pressure Port Size, Cover End | Standard Pilot |
| Weight | 1 in |
| Spline Description | Straight w/ Key |
| Max. RPM [Max | 2520V |
| Integral Valve Configuration | 2.32 in |
| Pilot Type | Double |
| Rotation | Buna-N |
| Minor Diameter | 1800 |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Relief Valve Setting | SAE B, 2 Bolt |
| Shaft Type | Single Shaft Seal |
| Shaft End RPM [Max | N/A |
| Mounting Flange | 1800 |
| Cover End Pressure [Max | 1800 |
| Pump Series | N/A |
| Major Diameter [Min | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Shaft Seal Type | N/A |
| Controlled Flow Rate | N/A |
| Cover End RPM [Max | N/A |
| Port Orientation - Shaft End | N/A |
| Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Length | 2520V21A8-86DD22R |
| Shaft Dia. | 3000 |
| Port Type | 2500 |
| Port Size | 12 |
| Mounting | 31.5 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Displacement Cover End (cu in/revolution) | Outlet 135° CW from Inlet |
| Minor Diameter [Max | Outlet 90° CW from Inlet |
| Manufacturer Part No. | 3/4 in Code 61 |
| Model No. | 1 in Code 61 |
| Shaft Key | 1.7 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692