9J5058 Casting Iron High Pressure Rotary Hydraulic Pump Group Vane for Cat
| Pressure Port Size, Cover End: | 45.0 LB |
| Mounting Flange: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| Shaft End Pressure [Max: | 2520VQ21A11-11DD20 |
| Shaft Key: | 2 1/2 |
| Max. RPM [Max: | Flange |
| Integral Valve Configuration: | N/A |
| Pressure Port Size, Shaft End: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Cover End | 45.0 LB |
| Mounting Flange | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| Shaft End Pressure [Max | 2520VQ21A11-11DD20 |
| Shaft Key | 2 1/2 |
| Max. RPM [Max | Flange |
| Integral Valve Configuration | N/A |
| Pressure Port Size, Shaft End | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 0.875 in |
| Model No. | 13 Tooth Splined |
| Port Orientation - Cover End | 2520VQ |
| Port Type | 1.375 in |
| Shaft Length | Buna-N |
| Minor Diameter [Min | 2500 |
| Cover End Flow @ RPM | 0.715 in |
| Cover End Pressure [Max | SAE B, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Shaft Dia. | 16/32 |
| Port Orientation - Shaft End | 2700 |
| GPM @ 1,800 rpm, Cover End | 2500 |
| Rotation | N/A |
| Mounting | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 0.873 in |
| Pilot Type | 0.872 in |
| Seal Material | N/A |
| Shaft End RPM [Max | N/A |
| Minor Diameter [Max | N/A |
| Major Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Size | 2520VQ21A11-11DD20 |
| Major Diameter [Max | 3000 |
| Cover End RPM [Max | 3000 |
| Spline Description | 16.5 |
| Weight | 31.5 |
| Shaft Seal Type | w/o Integral Valves |
| Relief Valve Setting | Outlet 135° CW from Inlet |
| Displacement Shaft End (cu in/revolution) | Outlet 90° CW from Inlet |
| Pump Series | 3/4 in Flange |
| Shaft Type | 1 in Flange |
| Minor Diameter | 2.22 |
| Controlled Flow Rate | 4.12 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692