Cold Planer Lubrication System Engine Oil Pump Group 6N1030 0R4999
| Pressure Port Size, Shaft End: | 45.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Model No.: | Right Hand (CW) |
| Relief Valve Setting: | 2520VQ21A12-11CC20 |
| Max. RPM [Max: | 2.5 |
| Displacement Cover End (cu in/revolution): | Flange |
| Weight: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 45.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Model No. | Right Hand (CW) |
| Relief Valve Setting | 2520VQ21A12-11CC20 |
| Max. RPM [Max | 2.5 |
| Displacement Cover End (cu in/revolution) | Flange |
| Weight | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Shaft Seal Type | 0.875 in |
| Minor Diameter | 13 Tooth Splined |
| Pressure Port Size, Cover End | 2520VQ |
| Port Orientation - Cover End | 1.375 in |
| Port Type | Double |
| Cover End Flow @ RPM | Buna-N |
| Cover End RPM [Max | 2500 |
| GPM @ 1,800 rpm, Shaft End | 0.715 in |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Mounting | 16/32 |
| Controlled Flow Rate | 2700 |
| Pump Series | 2500 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Major Diameter [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Dia. | 0.873 in |
| Manufacturer Part No. | 0.872 in |
| Spline Description | N/A |
| Pilot Type | N/A |
| Rotation | N/A |
| Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | 2520VQ21A12-11CC20 |
| Port Size | 2300 |
| Minor Diameter [Max | 3000 |
| Integral Valve Configuration | 18 |
| Major Diameter [Min | 31.5 |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Shaft End RPM [Max | Outlet 45° CW from Inlet |
| Shaft Type | Outlet Inline w/Inlet |
| Shaft Length | 3/4 in Flange |
| Cover End Pressure [Max | 1 in Flange |
| Shaft Key | 2.4 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692