3S4386 Hydraulic Loader Steering pump for Cat 955 D5B
Minor Diameter: | 32.0 LB |
Shaft End Pressure [Max: | Flange Mount |
Port Orientation - Shaft End: | Right Hand (CW) |
Displacement Shaft End (cu in/revolution): | 25VQ12A-11A20 |
Cover End Pressure [Max: | 1 1/2 |
Displacement Cover End (cu in/revolution): | Flange |
Pilot Type: | N/A |
Relief Valve Setting: | 20 |
PDF |
|
Product Details
Minor Diameter | 32.0 LB |
Shaft End Pressure [Max | Flange Mount |
Port Orientation - Shaft End | Right Hand (CW) |
Displacement Shaft End (cu in/revolution) | 25VQ12A-11A20 |
Cover End Pressure [Max | 1 1/2 |
Displacement Cover End (cu in/revolution) | Flange |
Pilot Type | N/A |
Relief Valve Setting | 20 |
Rotation | 12 gpm @ 1200 rpm |
Minor Diameter [Min | 11 |
Integral Valve Configuration | 0.875 in |
Shaft End Flow @ RPM | 13 Tooth Splined |
Port Orientation - Cover End | 18 gpm @ 1800 rpm |
Manufacturer Part No. | 25VQ |
Shaft Length | 1 3/8 in |
Pressure Port Size, Cover End | None |
GPM @ 1,800 rpm, Shaft End | 1 in Flange |
Weight | Buna-N |
Seal Material | 2700 |
Shaft Key | 3000 psi |
Mounting | 18 |
Major Diameter [Min | A |
Max. RPM [Max | SAE B, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
Cover End RPM [Max | Opposite Inlet Port |
Shaft Seal Type | 25VQ12A-11A20 |
GPM @ 1,800 rpm, Cover End | 2.45 |
Port Type | w/o Integral Valves |