Excavator Hydraulic Swing Motor Spare Parts JMF29 JMF33 JMF36 JMF43 JMF47 JMF53 JMF64 JMF80 JMF151
| Mounting: | 45.0 LB |
| Max. RPM [Max: | Flange Mount |
| Model No.: | Left Hand (CCW) |
| Minor Diameter: | 2520VQ21A8-11AA20LH |
| Shaft End Flow @ RPM: | 2 1/2 |
| Minor Diameter [Min: | Flange |
| Shaft Length: | N/A |
| Shaft End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| Mounting | 45.0 LB |
| Max. RPM [Max | Flange Mount |
| Model No. | Left Hand (CCW) |
| Minor Diameter | 2520VQ21A8-11AA20LH |
| Shaft End Flow @ RPM | 2 1/2 |
| Minor Diameter [Min | Flange |
| Shaft Length | N/A |
| Shaft End Pressure [Max | Standard Pilot |
| Major Diameter [Max | 0.875 in |
| Minor Diameter [Max | 13 Tooth Splined |
| Cover End Flow @ RPM | 2520VQ |
| Weight | 1.375 in |
| Shaft Type | Buna-N |
| Displacement Cover End (cu in/revolution) | 2500 |
| Displacement Shaft End (cu in/revolution) | 0.715 in |
| Mounting Flange | SAE B, 2 Bolt |
| Major Diameter [Min | Single Shaft Seal |
| Relief Valve Setting | 16/32 |
| Port Orientation - Shaft End | 2700 |
| Cover End RPM [Max | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Seal Material | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 0.873 in |
| Port Type | 0.872 in |
| Integral Valve Configuration | N/A |
| Pressure Port Size, Cover End | N/A |
| Port Orientation - Cover End | N/A |
| Port Size | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Spline Description | 2520VQ21A8-11AA20LH |
| Pump Series | 3000 |
| Shaft Dia. | 3000 |
| Cover End Pressure [Max | 12 |
| Shaft Key | 31.5 |
| Shaft End RPM [Max | w/o Integral Valves |
| Manufacturer Part No. | Outlet 135° CCW from Inlet |
| Shaft Seal Type | Outlet Opposite Inlet |
| Rotation | 3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | 1 in Flange |
| Pilot Type | 1.67 |
| Controlled Flow Rate | 4.12 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger