EX120-5 Excavator Spare Parts Swing Motor
| Shaft Type: | 95.0 LB |
| Pilot Type: | Flange Mount |
| Shaft End RPM [Max: | Right Hand (CW) |
| Shaft Length: | 4520V42A5-1AB22R |
| Port Type: | 3 1/2 |
| Integral Valve Configuration: | Flange |
| Controlled Flow Rate: | 5/16 in |
| Cover End Pressure [Max: | Standard Pilot |
Product Details
| Shaft Type | 95.0 LB |
| Pilot Type | Flange Mount |
| Shaft End RPM [Max | Right Hand (CW) |
| Shaft Length | 4520V42A5-1AB22R |
| Port Type | 3 1/2 |
| Integral Valve Configuration | Flange |
| Controlled Flow Rate | 5/16 in |
| Cover End Pressure [Max | Standard Pilot |
| Port Orientation - Shaft End | 1.25 in |
| Port Size | Straight w/ Key |
| Model No. | 4520V |
| Shaft End Flow @ RPM | 2.4375 in |
| Pressure Port Size, Cover End | Buna-N |
| Cover End RPM [Max | 1800 |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Shaft Dia. | SAE C, 2 Bolt |
| Major Diameter [Min | Single Shaft Seal |
| Cover End Flow @ RPM | N/A |
| Minor Diameter | 1800 |
| Pressure Port Size, Shaft End | 1800 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Seal Material | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | N/A |
| Mounting | N/A |
| Pump Series | N/A |
| Shaft Key | N/A |
| Mounting Flange | N/A |
| Minor Diameter [Max | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Shaft Seal Type | 4520V42A5-1AB22R |
| Port Orientation - Cover End | 3000 |
| Minor Diameter [Min | 2500 |
| Shaft End Pressure [Max | 7.5 |
| Manufacturer Part No. | 63 |
| Max. RPM [Max | N/A |
| Weight | Outlet 45° CCW from Inlet |
| Relief Valve Setting | Outlet Opposite Inlet |
| Spline Description | 3/4 in Code 61 |
| Rotation | 1 1/2 in Code 61 |
| Major Diameter [Max | 1.1 |
| Displacement Shaft End (cu in/revolution) | 8.4 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger