Excavator 4HK1 Engine Water Pump 8-98022872-1 for ZAX200-3
| Port Orientation - Shaft End: | 76.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Cover End RPM [Max: | Left Hand (CCW) |
| Seal Material: | 3525V35A17-86CA22L |
| Spline Description: | 3 |
| Shaft End RPM [Max: | Flange |
| Shaft End Pressure [Max: | 5/16 in |
| Max. RPM [Max: | Standard Pilot |
Product Details
| Port Orientation - Shaft End | 76.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Cover End RPM [Max | Left Hand (CCW) |
| Seal Material | 3525V35A17-86CA22L |
| Spline Description | 3 |
| Shaft End RPM [Max | Flange |
| Shaft End Pressure [Max | 5/16 in |
| Max. RPM [Max | Standard Pilot |
| Shaft Type | 1.375 in |
| Port Orientation - Cover End | Straight w/ Key |
| Weight | 3525V |
| Shaft Key | 3 7/8 in |
| Displacement Shaft End (cu in/revolution) | Buna-N |
| Shaft Dia. | 1800 |
| Pressure Port Size, Shaft End | N/A |
| Minor Diameter [Min | SAE C, 2 Bolt |
| Mounting | Single Shaft Seal |
| Relief Valve Setting | N/A |
| Minor Diameter [Max | 1800 |
| Shaft Seal Type | 1800 |
| Cover End Flow @ RPM | N/A |
| Cover End Pressure [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Mounting Flange | N/A |
| Rotation | N/A |
| Model No. | N/A |
| Pump Series | N/A |
| Controlled Flow Rate | N/A |
| Pilot Type | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft Length | 3525V35A17-86CA22L |
| Displacement Cover End (cu in/revolution) | 2500 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Port Size | 25.5 |
| Major Diameter [Min | 52.5 |
| Minor Diameter | N/A |
| Manufacturer Part No. | Outlet 135° CCW from Inlet |
| Port Type | Outlet Inline w/Inlet |
| Integral Valve Configuration | 1 in Code 61 |
| Shaft End Flow @ RPM | 1 1/4 in Code 61 |
| Major Diameter [Max | 3.4 |
| Pressure Port Size, Cover End | 6.8 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger