Kawasaki K3V112DT Hydraulic Pump Spare Parts Repair Kit Pump Barrel/ Swash Plate/ Valve Plate
| Max. RPM [Max: | 32.0 LB |
| Manufacturer Part No.: | Flange Mount |
| Shaft Dia.: | Right Hand (CW) |
| Shaft Seal Type: | 12 gal/min @ 1200 rpm |
| Controlled Flow Rate: | 25VQ12A-11B20 |
| Model No.: | 1.5 |
| Pressure Port Size, Shaft End: | Flange |
| Shaft End Pressure [Max: | N/A |
Product Details
| Max. RPM [Max | 32.0 LB |
| Manufacturer Part No. | Flange Mount |
| Shaft Dia. | Right Hand (CW) |
| Shaft Seal Type | 12 gal/min @ 1200 rpm |
| Controlled Flow Rate | 25VQ12A-11B20 |
| Model No. | 1.5 |
| Pressure Port Size, Shaft End | Flange |
| Shaft End Pressure [Max | N/A |
| Cover End Pressure [Max | 20 |
| Port Orientation - Shaft End | 12 gpm @ 1200 rpm |
| Shaft Key | 11 |
| Displacement Shaft End (cu in/revolution) | 0.875 in |
| Pump Series | 13 Tooth Splined |
| Major Diameter [Min | 18 gpm @ 1800 rpm |
| Mounting | 25VQ |
| Pressure Port Size, Cover End | 1 3/8 in |
| Rotation | Single |
| Cover End Flow @ RPM | None |
| Minor Diameter | 1 in Flange |
| Shaft End Flow @ RPM | Buna-N |
| Major Diameter [Max | 2700 |
| Shaft End RPM [Max | 3000 psi |
| GPM @ 1,800 rpm, Cover End | 18 |
| Port Size | A |
| Shaft Type | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Port Orientation - Cover End | 90° CCW from Inlet |
| Relief Valve Setting | 25VQ12A-11B20 |
| Port Type | 2.5 |
| Shaft Length | w/o Integral Valves |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger