25V Vicker Hydraulic Positive Displacement Pump Cartridge Kit
| Pressure Port Size, Shaft End: | 75.0 LB |
| Seal Material: | Flange Mount |
| Shaft Seal Type: | Left Hand (CCW) |
| Controlled Flow Rate: | 3520VQ35A12-11AA20-LH |
| Pilot Type: | 3 |
| Displacement Shaft End (cu in/revolution): | Flange |
| Major Diameter [Min: | N/A |
| Weight: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 75.0 LB |
| Seal Material | Flange Mount |
| Shaft Seal Type | Left Hand (CCW) |
| Controlled Flow Rate | 3520VQ35A12-11AA20-LH |
| Pilot Type | 3 |
| Displacement Shaft End (cu in/revolution) | Flange |
| Major Diameter [Min | N/A |
| Weight | Standard Pilot |
| Cover End Flow @ RPM | 1.25 in |
| Shaft End Pressure [Max | 14 Tooth Splined |
| Mounting Flange | 3520VQ |
| Shaft End RPM [Max | 1 15/16 in |
| Shaft Dia. | Buna-N |
| Minor Diameter [Min | 2400 |
| Port Type | 1.04 in |
| Shaft Key | SAE C, 2 Bolt |
| Rotation | Single Shaft Seal |
| Minor Diameter | 12/24 |
| Shaft Type | 2500 |
| Port Orientation - Cover End | 2400 |
| Port Size | N/A |
| Displacement Cover End (cu in/revolution) | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| Minor Diameter [Max | 1.247 in |
| Manufacturer Part No. | N/A |
| Cover End Pressure [Max | N/A |
| Port Orientation - Shaft End | N/A |
| Pressure Port Size, Cover End | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Spline Description | 3520VQ35A12-11AA20-LH |
| Shaft End Flow @ RPM | 2300 |
| Mounting | 3000 |
| Integral Valve Configuration | 18 |
| GPM @ 1,800 rpm, Cover End | 52.5 |
| Shaft Length | w/o Integral Valves |
| Model No. | Outlet 135° CCW from Inlet |
| Max. RPM [Max | Outlet Opposite Inlet |
| Cover End RPM [Max | 3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | 1 1/4 in Flange |
| Pump Series | 2.41 |
| Relief Valve Setting | 6.88 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger