New Aftermarket A10VSO Piston Type Hydraulic Pump For Rexroth
| Controlled Flow Rate: | 75.0 LB |
| Port Orientation - Shaft End: | Flange Mount |
| Pump Series: | Right Hand (CW) |
| Port Orientation - Cover End: | 3520VQ38A11-11DD20 |
| Displacement Cover End (cu in/revolution): | 3 |
| Minor Diameter: | Flange |
| Mounting Flange: | N/A |
| Mounting: | Standard Pilot |
| PDF |
|
Product Details
| Controlled Flow Rate | 75.0 LB |
| Port Orientation - Shaft End | Flange Mount |
| Pump Series | Right Hand (CW) |
| Port Orientation - Cover End | 3520VQ38A11-11DD20 |
| Displacement Cover End (cu in/revolution) | 3 |
| Minor Diameter | Flange |
| Mounting Flange | N/A |
| Mounting | Standard Pilot |
| Relief Valve Setting | 1.25 in |
| Pressure Port Size, Shaft End | 14 Tooth Splined |
| GPM @ 1,800 rpm, Cover End | 3520VQ |
| Integral Valve Configuration | 1.9375 in |
| GPM @ 1,800 rpm, Shaft End | Double |
| Shaft Type | Buna-N |
| Shaft Key | 2400 |
| Shaft Seal Type | 1.04 in |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| Rotation | Single Shaft Seal |
| Max. RPM [Max | 12/24 |
| Major Diameter [Min | 2500 |
| Shaft Dia. | 2400 |
| Cover End RPM [Max | N/A |
| Minor Diameter [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Minor Diameter [Min | 1.247 in |
| Manufacturer Part No. | N/A |
| Cover End Flow @ RPM | N/A |
| Port Size | N/A |
| Spline Description | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Seal Material | 3520VQ38A11-11DD20 |
| Shaft End RPM [Max | 3000 |
| Pressure Port Size, Cover End | 3000 |
| Shaft Length | 16.5 |
| Port Type | 57 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Pilot Type | Outlet 135° CW from Inlet |
| Model No. | Outlet 90° CW from Inlet |
| Weight | 3/4 in Flange |
| Shaft End Pressure [Max | 1 1/4 in Flange |
| Major Diameter [Max | 2.2 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger