Hydraulic Gear Pump Tandem Pump 07400-40500 for Bulldozer D60
| Cover End RPM [Max: | 101.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Port Type: | Left Hand (CCW) |
| Pilot Type: | 4525V60E17-86CC22L |
| Shaft End Flow @ RPM: | 3.5 |
| GPM @ 1,800 rpm, Cover End: | Flange |
| Pump Series: | 3/8 in |
| Seal Material: | Standard Pilot |
Product Details
| Cover End RPM [Max | 101.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Port Type | Left Hand (CCW) |
| Pilot Type | 4525V60E17-86CC22L |
| Shaft End Flow @ RPM | 3.5 |
| GPM @ 1,800 rpm, Cover End | Flange |
| Pump Series | 3/8 in |
| Seal Material | Standard Pilot |
| Cover End Pressure [Max | 1.5 in |
| Manufacturer Part No. | Straight w/ Key |
| Shaft Type | 4525V |
| Pressure Port Size, Shaft End | 3 7/16 in |
| Model No. | Double |
| Integral Valve Configuration | Buna-N |
| Shaft Length | 1800 |
| Shaft End Pressure [Max | N/A |
| Port Size | SAE C, 2 Bolt |
| Mounting | Single Shaft Seal |
| Spline Description | N/A |
| Mounting Flange | 1800 |
| Cover End Flow @ RPM | 1800 |
| Minor Diameter [Min | N/A |
| Shaft Dia. | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | N/A |
| Pressure Port Size, Cover End | N/A |
| Shaft End RPM [Max | N/A |
| Max. RPM [Max | N/A |
| Major Diameter [Min | N/A |
| Rotation | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Controlled Flow Rate | 4525V60E17-86CC22L |
| Shaft Key | 2500 |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Major Diameter [Max | 25.5 |
| GPM @ 1,800 rpm, Shaft End | 90 |
| Port Orientation - Shaft End | N/A |
| Displacement Cover End (cu in/revolution) | Outlet 45° CW from Inlet |
| Shaft Seal Type | Outlet Inline w/Inlet |
| Weight | 1 in Code 61 |
| Relief Valve Setting | 1 1/2 in Code 61 |
| Minor Diameter | 3.4 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger