Hydraulic Gear Pump 705-12-38211 for Komatsu Dump Truck HD465-3
| Port Size: | 30.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Shaft End Flow @ RPM: | V2010-1F7S1S-1AA12 |
| Pressure Port Size, Cover End: | 1.5 |
| GPM @ 1,800 rpm, Cover End: | Flange |
| Cover End Flow @ RPM: | 3/16 in |
| Shaft Key: | N/A |
Product Details
| Port Size | 30.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Shaft End Flow @ RPM | V2010-1F7S1S-1AA12 |
| Pressure Port Size, Cover End | 1.5 |
| GPM @ 1,800 rpm, Cover End | Flange |
| Cover End Flow @ RPM | 3/16 in |
| Shaft Key | N/A |
| Port Orientation - Cover End | 0.875 in |
| Rotation | Straight w/ Key |
| GPM @ 1,800 rpm, Shaft End | V2010 |
| Displacement Shaft End (cu in/revolution) | 2 5/16 in |
| Relief Valve Setting | Double |
| Max. RPM [Max | Buna-N |
| Major Diameter [Max | 3000 |
| Mounting Flange | N/A |
| Mounting | SAE B, 2 Bolt |
| Pilot Type | Single Shaft Seal |
| Shaft Type | N/A |
| Seal Material | 3000 |
| Model No. | 3000 |
| Pump Series | N/A |
| Spline Description | 1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max | N/A |
| Shaft Length | N/A |
| Cover End RPM [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Displacement Cover End (cu in/revolution) | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 2500 |
| Manufacturer Part No. | 2500 |
| Shaft Dia. | 1.5 |
| Weight | 10.5 |
| Port Type | N/A |
| Controlled Flow Rate | Outlet 135° CCW from Inlet |
| Pressure Port Size, Shaft End | Outlet Opposite Inlet |
| Minor Diameter | 1/2 in SAE O-Ring |
| Shaft End Pressure [Max | 3/4 in SAE O-Ring |
| Port Orientation - Shaft End | 0.2 |
| Minor Diameter [Min | 1.4 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger