PC400-8 Excavator 6D125 diesel engine cooling water pump 6251-61-1102
| Pressure Port Size, Shaft End: | 118.0 LB |
| Relief Valve Setting: | Flange Mount |
| Pilot Type: | Right Hand (CW) |
| Shaft End Pressure [Max: | 4535V42A25-11DD22R |
| Controlled Flow Rate: | 4 |
| Port Orientation - Cover End: | Flange |
| Minor Diameter [Min: | N/A |
| Shaft Seal Type: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 118.0 LB |
| Relief Valve Setting | Flange Mount |
| Pilot Type | Right Hand (CW) |
| Shaft End Pressure [Max | 4535V42A25-11DD22R |
| Controlled Flow Rate | 4 |
| Port Orientation - Cover End | Flange |
| Minor Diameter [Min | N/A |
| Shaft Seal Type | Standard Pilot |
| Minor Diameter | 1.56 in |
| Integral Valve Configuration | 14 Tooth Splined |
| Shaft End RPM [Max | 4535V |
| Shaft Type | 2.4375 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Mounting | 1800 |
| Displacement Shaft End (cu in/revolution) | 1.055 in |
| Shaft End Flow @ RPM | SAE C, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Major Diameter [Max | 12/24 |
| Shaft Key | 1800 |
| Port Type | 1800 |
| Pressure Port Size, Cover End | N/A |
| Pump Series | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Weight | 1.25 in |
| Max. RPM [Max | 1.247 in |
| Shaft Dia. | 1.06 in |
| Shaft Length | 1.05 in |
| Cover End Pressure [Max | N/A |
| Spline Description | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Seal Material | 4535V42A25-11DD22R |
| Mounting Flange | 2500 |
| Cover End Flow @ RPM | 2500 |
| Port Size | 37.5 |
| Port Orientation - Shaft End | 63 |
| Manufacturer Part No. | N/A |
| Major Diameter [Min | Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CW from Inlet |
| Model No. | 1 1/4 in Code 61 |
| Displacement Cover End (cu in/revolution) | 1 1/2 in Code 61 |
| Cover End RPM [Max | 4.9 |
| Rotation | 8.4 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger