D80/D85/D135 Bulldozer Steering Pump 07436-72202
| Major Diameter [Max: | 45.0 LB |
| Rotation: | Flange Mount |
| Seal Material: | Right Hand (CW) |
| Weight: | 2520V12A12-1AD22R |
| Pump Series: | 2.5 |
| Port Type: | Flange |
| Cover End Flow @ RPM: | 1/4 in |
| GPM @ 1,800 rpm, Cover End: | Standard Pilot |
Product Details
| Major Diameter [Max | 45.0 LB |
| Rotation | Flange Mount |
| Seal Material | Right Hand (CW) |
| Weight | 2520V12A12-1AD22R |
| Pump Series | 2.5 |
| Port Type | Flange |
| Cover End Flow @ RPM | 1/4 in |
| GPM @ 1,800 rpm, Cover End | Standard Pilot |
| Relief Valve Setting | 0.875 in |
| Pilot Type | Straight w/ Key |
| Shaft Length | 2520V |
| Minor Diameter [Max | 2.32 in |
| Model No. | Double |
| Mounting Flange | Buna-N |
| Pressure Port Size, Cover End | 1800 |
| Major Diameter [Min | N/A |
| Shaft End Pressure [Max | SAE B, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Minor Diameter [Min | N/A |
| Port Orientation - Shaft End | 1800 |
| Shaft End Flow @ RPM | 1800 |
| Cover End Pressure [Max | N/A |
| Integral Valve Configuration | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 2.5 |
| Port Size | N/A |
| Mounting | N/A |
| Cover End RPM [Max | N/A |
| Shaft Dia. | N/A |
| Displacement Cover End (cu in/revolution) | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Seal Type | 2520V12A12-1AD22R |
| Shaft End RPM [Max | 3000 |
| Shaft Key | 2500 |
| Controlled Flow Rate | 18 |
| Manufacturer Part No. | 18 |
| Minor Diameter | N/A |
| Max. RPM [Max | Outlet 135° CW from Inlet |
| Shaft Type | Outlet Opposite Inlet |
| Pressure Port Size, Shaft End | 3/4 in Code 61 |
| GPM @ 1,800 rpm, Shaft End | 1 in Code 61 |
| Port Orientation - Cover End | 2.5 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger